Preferences Dialog SANsurfer Switch Manager | Q-Logic 5202, 5200

0	2 – Using SANsurfer Switch Manager
	2 – Using SANsurfer Switch Manager
	Setting SANsurfer Switch Manager Preferences

Enable (default) or disable the Event Browser. Refer to ”Displaying the Event Browser” on page 3-11. If the Event Browser is enabled using the Preferences dialog as shown in Figure 2-5, the next time SANsurfer Switch Manager is started, all events will be displayed. If the Event Browser is disabled when SANsurfer Switch Manager is started and later enabled, only those events from the time the Event Browser was enabled and forward will be displayed.

Choose the default port view when opening the faceplate display. You can set the faceplate to reflect the current port type (default), port speed, port operational state, or port transceiver media. Regardless of the default port view you choose, you can change the port view in the faceplate display by opening the View menu and selecting a different port view option. Refer to the corresponding subsection for more information:

”Port Types” on page 5-2

”Displaying Port Operational States” on page 5-3

”Displaying Port Speeds” on page 5-3

”Displaying Transceiver Media Status” on page 5-4

Figure 2-5. Preferences Dialog – SANsurfer Switch Manager

To set preferences for your SANsurfer Switch Manager sessions, do the following:

1.Open the File menu, and select Preferences to open the Preferences dialog.

2.Enter, or browse, for paths to the working directory and browser.

3.In the Application-wide Options area, choose the preferences you want.

4.Click the OK button to save the changes.

59056-02 A

2-15

Image 31

Q-Logic 5202, 5200 manual Preferences Dialog SANsurfer Switch Manager

Contents

SANbox 5200 Series Switch Management User’s Guide Document Revision History SANbox 5200 Series Switch Management User’s Guide Table of Contents Section Managing Fabrics SANbox 5200 Series Switch Management Section Managing Switches 3.3 NTP Client 4.1 Snmp Configuration 4.2 Snmp Trap ConfigurationChanging the Default Performance View File Encryption Key Section Managing Ports 7.3 Appendix a Command Line Interface 104 Shutdown CommandGlossary Index 102Page 105 Tables SANbox 5200 Series Switch Management User’s Guide 59056-02 a Related Materials Intended Audience Jdom License Contact Information Technical SupportAvailability Training Introduction Technical Support 59056-02 a Installing the Management Application Using SANsurfer Switch Manager For a Solaris workstation SANsurfer Switch ManagerFor a Windows workstation For a Linux workstation SANsurfer Management Suite SMS Installation for Windows Chglax.bat SMS Installation for Linux SMS Installation for Solaris Change directories to the package location Install the new SANsurfer Switch Manager packageLocate and execute the file sbmoversms.sh Starting SANsurfer Switch Manager Initial Startup Dialog ‰ For Linux or Solaris enter the SANsurfer command SANsurfer Switch Manager Window Exiting SANsurfer Switch Manager Save Default Fabric View File Dialog SMS Uninstall Uninstalling SANsurfer Switch Manager Changing the Encryption Key for the Default Fabric View File Standalone Uninstall Saving and Opening Fabric View Files Setting SANsurfer Switch Manager Preferences Preferences Dialog SANsurfer Switch Manager Viewing Software Version and Copyright Information Using Online Help Topology Display SANsurfer Switch Manager User InterfaceFaceplate Display Topology Display Menu Menu Bars Faceplate Display Menu Faceplate Display Menu Topology Display Menu Shortcut Keys Topology Display Shortcut Keys Faceplate Display Shortcut Keys Faceplate Display Shortcut Keys Alt+S, L SwitchLoad Firmware Tool Bar Buttons Tool Bar Fabric Tree Fabric Tree Graphic Window Working Status IndicatorData Window and Tabs Switch and Link Status Using the Topology Display Selecting Switches and Links Working with Switches and LinksArranging Switches in the Display Topology Data Windows Opening the Faceplate Display and Topology Popup Menus 11. Faceplate Display Using the Faceplate Display Working with Ports Port Views and StatusSelecting Ports Faceplate Data Windows Opening the Faceplate Popup MenuPage User Account Security Fabric Security Enabling In-band Management Fabric ServicesEnabling Snmp Configuration Click the In-band Management Enable button Saving a Version Snapshot Fabric TrackerViewing and Comparing Version Snapshots Managing the Fabric Database Exporting Version Snapshots to a File Add a New Fabric Dialog Adding a Fabric Rediscovering a Fabric Removing a FabricOpening a Fabric View File Saving a Fabric View File Adding a New Switch to a Fabric Deleting Switches and Links Replacing a Failed Switch Displaying Fabric Information Fabric Status Topology Display Switch and Status Icons Events Browser Displaying the Event Browser Description Icon Severity Levels Filter Events Dialog Filtering the Event Browser Saving the Event Browser to a File Sorting the Event Browser Devices Data Window Entries Devices Data Window Active Zone Set Data Window Active Zone Set Data Window Working with Device Information and Nicknames Link Data WindowDisplaying Detailed Device Information Managing Device Port Nicknames Exporting Device Information to a FileCreating a Nickname Deleting a Nickname Editing a NicknameExporting Nicknames to a File Zoning a Fabric Importing a Nicknames FileZoning Concepts Soft Zones Zones Aliases Access Control List Hard ZonesZone Sets Zoning Database Managing the Zoning Database Using the Zoning WizardManaging the zoning database consists of the following Edit Zoning Dialog Editing the Zoning Database Edit Zoning Dialog Tool Bar Buttons and Icons Create Alias button create another name for a set of objects Interop Auto Save Configuring the Zoning Database Saving the Zoning Database to a File Default VisibilityRestoring the Zoning Database from a File Removing All Zoning Definitions Restoring the Default Zoning Database Creating a Zone Set Managing Zone Sets Copying a Zone to a Zone Set Activating and Deactivating a Zone SetRemoving a Zone from a Zone Set or from All Zone Sets Managing Zones Removing a Zone SetManaging zones involves the following Creating a Zone in a Zone Set Adding Zone Members Removing a Zone from All Zone Sets Renaming a Zone or a Zone SetRemoving a Zone Member Removing a Zone from a Zone Set Managing Aliases Changing Zone TypesCreating an Alias Removing an Alias from All Zones Adding a Member to an Alias Zone Merge Failure Merging Fabrics and Zoning Zone Merge Failure Recovery Managing Switches Factory User Accounts Managing User Accounts Creating User Accounts User Account Administration Dialog Add Account Removing a User Account User Account Administration Dialog Remove Account User Account Administration Dialog Change Password Changing a User Account Password Modifying a User Account User Account Administration Dialog Modify Account Faceplate Display Switch Information Displaying Switch Information Switch Data Window Entries Switch Data Window Ratov Displaying Detailed Device Information on page 3-17for Port Information Data Window Port Statistics Data Window Configured Zonesets Data Window Configured Zonesets Data Windows Port Threshold Alarm Configuration Dialog Configuring Port Threshold Alarms Sample Window Paging a SwitchEvent Count Resetting a Switch Setting the Date/Time and Enabling NTP Client Type Description Switch Resets Using the Configuration Wizard Configuring a SwitchSwitch Properties Switch Administrative States Symbolic Name Domain ID and Domain ID Lock Switch Administrative States Fabric Device Management Interface Broadcast Support Interop Mode for ZoningIn-band Management Timeout Values Timeout ValuesLegacy Port Address Format 10. Network Properties Dialog Network Properties IP Configuration Parameters IP Configuration NTP Client Remote Logging 11. Snmp Properties Dialog Snmp Properties Snmp Configuration Parameters Snmp Configuration Snmp Trap Configuration Parameters Snmp Trap Configuration Restoring a Switch Archiving a Switch 12. Restore Dialogs Full and Selective Factory Default Configuration Settings Restoring the Factory Default Configuration Factory Default Configuration Settings Downloading a Support File 13. Features License Key Dialog Upgrading the Switch Using License Keys Installing Firmware 15. Hardware Status LEDs Displaying Hardware Status Displaying Port Information Managing Ports Displaying Port Types Monitoring Port StatusPort Types Port Speeds Displaying Port Operational StatesDisplaying Port Speeds Port Operational States Port Transceiver Media View Displaying Transceiver Media Status Port Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Port Properties Dialog Configuring Ports Port Administrative States Changing Port Administrative States Changing Port Types Changing Port Speeds Scan Device Stream Guard Using the Extended Credits Wizard Changing Port Symbolic Name Designate Donor Ports Resetting a Port Port Loopback Test Dialog Testing Ports Managing Ports Fabric View Graphs Graphing Port Performance Exiting SANsurfer Performance Viewer Starting SANsurfer Performance Viewer Saving and Opening Performance View Files Save Default Performance View File Dialog Setting SANsurfer Performance Viewer Preferences Changing the Default Performance View File Encryption Key Displaying Graphs Setting the Polling Frequency Customizing Graphs Arranging Graphs in the Display Managing Ports Graphing Port Performance Printing Graphs Rescaling a Selected GraphSaving Graph Statistics to a File Managing Ports Graphing Port Performance 59056-02 a Logging On to a Switch Command Line Interface User Accounts Modifying a Configuration Working with Switch Configurations Ftp ipaddress Backing up and Restoring Switch Configurations Date, configswitch16910112003, for example Table A-1. Command-Line Completion CommandsCommand syntax is as follows Command keyword keyword value Admin Session Commands Table A-2. Commands Listed by Authority Level Keywords Admin CommandAuthority Syntax Syntax alias Alias Command Remove alias memberlist Members aliasRename aliasold aliasnew Edit configname Config CommandSyntax config Keywords activate configname Save configname RestoreManager Archive function are not compatible with the Config Restore command Download the file to the workstation # ftp symbolicname or ipaddress Create support Create Support CommandAdmin session Following is an example of the Create Support command You have transferred 43430 bytes in 1 files Syntax date Date CommandKeywords MMDDhhmmCCYY Log Feature CommandSyntax feature Keywords add licensekey Authority Admin Firmware Install CommandSyntax firmware install Syntax Hardreset Command Authority None Help CommandKeywords command Syntax help command keyword Authority None Syntax history History Command Hotreset Hotreset Command Image Command Ftp Ftp switchname Wait for the unpack to complete Lip portnumber Lip CommandFollowing is an example of the Lip command Reinitializes the specified loop port Syntax passwd accountname Keywords accountname Passwd Command Syntax ping ipaddress Ping CommandKeywords ipaddress Displays current system process information Ps CommandFollowing is an example of the Ps command Syntax Examples Closes the Telnet session Quit CommandSyntax quit, exit, or logout Config configname Reset Command System Table A-3. Switch Configuration DefaultsZoning Table A-4. Port Configuration Defaults Table A-6. Zoning Configuration Defaults Table A-5. Port Threshold Alarm Configuration Defaults Table A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Syntax set Set Command Switch state Setup optionPort option Port portnumber Set Config CommandSet config Table A-9. Set Config Port Parameters Command Line Interface Set Config Command Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Number of milliseconds the switch Table A-10. Set Config Switch Parameters Threshold Table A-11. Set Config Threshold Parameters Table A-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Threshold command Following is an example of the Set Config Switch command To discard this configuration use the config cancel command Attributes Following is an example of the Set Config Zoning command Clear Set Log CommandSet log Archive Level filter Display filter Stop Port portlistSave Start Set Port Command Disables the port by removing power from the port lasers Port from accepting a device loginDown Snmp System Set Setup CommandSet setup Table A-13. Snmp Configuration Settings Table A-14. System Configuration Settings Table A-14. System Configuration Settings Setup snmp SANbox Manager admin # set setup system Following is an example of the Set Setup System command Broadcast Show CommandAlarm option Keywords about Log option Fdmi portwwn Table A-15. Show Port Parameters Ns optionPagebreak Perf option Lipalpdalps Steering domainid Post log Support Table A-16. Switch Operational Parameters Version TopologyDisplays all connected devices Users Following is an example of the Show Fabric command Following is an example of the Show Domains command Following is an example of the Show Fdmi WWN command Following is an example of the Show Fdmi command Following is an example of the Show NS domainID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS portID command Collisions0 txqueuelen100 Following is an example of the Show Interface command PL-XPL-VC-SG3-22 Following is an example of the Show Port command Following is an example of the Show Topology command Following is an example of the Show Switch command Command Line Interface Show Command Following is an example of the Show Version command Show config Show Config Command Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Component Show Log CommandShow log Number of events Port SettingsLevel Options Following is an example of the Show Log Options command Following is an example of the Show Log Level commandFollowing is an example of the Show Log command Show Perf Command Errors portnumber Following is an example of the Show Perf Byte command Show setup Show Setup CommandMfg Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Power from the switch Shutdown CommandShutdown Status Test CommandTest Port portnumber testtype Admin start Command Line Interface Test Command Examples The following is an example of the Uptime command Uptime CommandAuthority None Syntax uptime User Command Following is an example of the User Edit command Following is an example of the User Add command Following is an example of the User List command Following is an example of the User Delete command Following is an example of the Whoami command Whoami CommandWhoami Syntax zone Zone Command Type zone zonetype Members zoneRemove zone memberlist Rename zoneold zonenew Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Syntax zoneset Zoneset Command Rename zonesetold zonesetnew Remove zoneset zonelistZones zoneset Opens a Zoning Edit session Zoning CommandHistory Table A-17. Zoning Database Limits Limits E1JBOD1 E2JBOD2 Following is an example of the Zoning Limits command Following is an example of the Zoning List command 108 59056-02 a BootP Access Control List ZoneAdministrative State Alarm Fabric Management Switch Class 3 ServiceConfigured Zone Sets Default Visibility Maintenance Mode Input Power LEDInter-Switch Link Maintenance Button Target Zoning DatabaseSmall Form-Factor Pluggable Soft Zone Index Index-2 59056-02 a 59056-02 a Index-3 Index-4 59056-02 a 59056-02 a Index-5 Index-6 59056-02 a