Topology Data Windows | Q-Logic 5200, 5202 guide

2 – Using SANsurfer Switch Manager		0
2 – Using SANsurfer Switch Manager
Using the Topology Display

2.11.2.3

Opening the Faceplate Display and Topology Popup Menus

The faceplate display shows the front of a single switch and its ports. To open the faceplate display when viewing the topology display, click the switch entry/icon in the fabric tree, or double-click the switch graphic.

The topology display also offers a fabric, switch, and a link popup menu:

To open the fabric popup menu, right-click the graphic window background. The fabric popup menu presents selections to refresh the fabric, select all switches, select all links, or layout topology.

To open the switch popup menu, right-click the switch icon in the graphic window. The switch popup menu presents selections to refresh the switch, delete the switch from the display, open the Switch Properties dialog, open the Network Properties dialog, and open the SNMP Properties dialog.

To open the link popup menu, right-click the link. The Link popup menu presents a selection to delete the link from the display.

2.11.3

Topology Data Windows

The topology display provides the following data windows corresponding to the data window tabs:

Devices – displays information about devices (hosts and storage targets) connected to the switch. Refer to ”Devices Data Window” on page 3-15for more information.

Active Zoneset – displays the active zone set for the fabric including zones and their member ports. Refer to ”Active Zone Set Data Window” on page 3-16for more information about this data window. Refer to ”Zoning a Fabric” on page 3-20for information about zone sets and zones.

Switch – displays current network and switch configuration data for the selected switches. Refer to ”Switch Data Window” on page 4-8for more information.

Link – displays information about the inter-switch links. Refer to ”Link Data Window” on page 3-17to for more information.

2-28	59056-02 A

Image 44

Q-Logic 5200, 5202 manual Opening the Faceplate Display and Topology Popup Menus, Topology Data Windows

Contents

SANbox 5200 Series Switch Management User’s Guide SANbox 5200 Series Switch Management User’s Guide Document Revision History Table of Contents Section Managing Fabrics SANbox 5200 Series Switch Management Section Managing Switches 4.1 Snmp Configuration 4.2 Snmp Trap Configuration Changing the Default Performance View File Encryption KeySection Managing Ports 3.3 NTP Client Appendix a Command Line Interface 7.3 Shutdown Command Glossary Index102 104Page Tables 105 SANbox 5200 Series Switch Management User’s Guide 59056-02 a Intended Audience Related Materials Jdom License Technical Support AvailabilityTraining Contact Information Introduction Technical Support 59056-02 a Using SANsurfer Switch Manager Installing the Management Application SANsurfer Switch Manager For a Windows workstationFor a Linux workstation For a Solaris workstation SMS Installation for Windows SANsurfer Management Suite Chglax.bat SMS Installation for Linux SMS Installation for Solaris Locate and execute the file sbmoversms.sh Install the new SANsurfer Switch Manager packageChange directories to the package location Starting SANsurfer Switch Manager ‰ For Linux or Solaris enter the SANsurfer command Initial Startup Dialog Exiting SANsurfer Switch Manager SANsurfer Switch Manager Window Save Default Fabric View File Dialog Uninstalling SANsurfer Switch Manager SMS Uninstall Standalone Uninstall Changing the Encryption Key for the Default Fabric View File Setting SANsurfer Switch Manager Preferences Saving and Opening Fabric View Files Preferences Dialog SANsurfer Switch Manager Using Online Help Viewing Software Version and Copyright Information Faceplate Display SANsurfer Switch Manager User InterfaceTopology Display Menu Bars Topology Display Menu Faceplate Display Menu Faceplate Display Menu Topology Display Shortcut Keys Topology Display Menu Shortcut Keys Faceplate Display Shortcut Keys Faceplate Display Shortcut Keys Alt+S, L SwitchLoad Firmware Tool Bar Tool Bar Buttons Fabric Tree Fabric Tree Data Window and Tabs Working Status IndicatorGraphic Window Using the Topology Display Switch and Link Status Arranging Switches in the Display Working with Switches and LinksSelecting Switches and Links Opening the Faceplate Display and Topology Popup Menus Topology Data Windows Using the Faceplate Display 11. Faceplate Display Selecting Ports Port Views and StatusWorking with Ports Opening the Faceplate Popup Menu Faceplate Data WindowsPage Fabric Security User Account Security Fabric Services Enabling Snmp ConfigurationClick the In-band Management Enable button Enabling In-band Management Viewing and Comparing Version Snapshots Fabric TrackerSaving a Version Snapshot Exporting Version Snapshots to a File Managing the Fabric Database Adding a Fabric Add a New Fabric Dialog Removing a Fabric Opening a Fabric View FileSaving a Fabric View File Rediscovering a Fabric Deleting Switches and Links Adding a New Switch to a Fabric Replacing a Failed Switch Displaying Fabric Information Topology Display Switch and Status Icons Fabric Status Displaying the Event Browser Events Browser Severity Levels Description Icon Filtering the Event Browser Filter Events Dialog Sorting the Event Browser Saving the Event Browser to a File Devices Data Window Devices Data Window Entries Active Zone Set Data Window Active Zone Set Data Window Displaying Detailed Device Information Link Data WindowWorking with Device Information and Nicknames Creating a Nickname Exporting Device Information to a FileManaging Device Port Nicknames Exporting Nicknames to a File Editing a NicknameDeleting a Nickname Zoning Concepts Importing a Nicknames FileZoning a Fabric Zones Soft Zones Zone Sets Access Control List Hard ZonesAliases Zoning Database Managing the zoning database consists of the following Using the Zoning WizardManaging the Zoning Database Editing the Zoning Database Edit Zoning Dialog Edit Zoning Dialog Tool Bar Buttons and Icons Create Alias button create another name for a set of objects Configuring the Zoning Database Interop Auto Save Restoring the Zoning Database from a File Default VisibilitySaving the Zoning Database to a File Restoring the Default Zoning Database Removing All Zoning Definitions Managing Zone Sets Creating a Zone Set Removing a Zone from a Zone Set or from All Zone Sets Activating and Deactivating a Zone SetCopying a Zone to a Zone Set Managing zones involves the following Removing a Zone SetManaging Zones Creating a Zone in a Zone Set Adding Zone Members Renaming a Zone or a Zone Set Removing a Zone MemberRemoving a Zone from a Zone Set Removing a Zone from All Zone Sets Creating an Alias Changing Zone TypesManaging Aliases Adding a Member to an Alias Removing an Alias from All Zones Merging Fabrics and Zoning Zone Merge Failure Zone Merge Failure Recovery Managing Switches Managing User Accounts Factory User Accounts User Account Administration Dialog Add Account Creating User Accounts User Account Administration Dialog Remove Account Removing a User Account Changing a User Account Password User Account Administration Dialog Change Password User Account Administration Dialog Modify Account Modifying a User Account Displaying Switch Information Faceplate Display Switch Information Switch Data Window Switch Data Window Entries Ratov Displaying Detailed Device Information on page 3-17for Port Statistics Data Window Port Information Data Window Configured Zonesets Data Windows Configured Zonesets Data Window Configuring Port Threshold Alarms Port Threshold Alarm Configuration Dialog Paging a Switch EventCount Sample Window Setting the Date/Time and Enabling NTP Client Resetting a Switch Switch Resets Type Description Switch Properties Configuring a SwitchUsing the Configuration Wizard Symbolic Name Switch Administrative States Switch Administrative States Domain ID and Domain ID Lock Fabric Device Management Interface In-band Management Interop Mode for ZoningBroadcast Support Legacy Port Address Format Timeout ValuesTimeout Values Network Properties 10. Network Properties Dialog IP Configuration IP Configuration Parameters Remote Logging NTP Client Snmp Properties 11. Snmp Properties Dialog Snmp Configuration Snmp Configuration Parameters Snmp Trap Configuration Snmp Trap Configuration Parameters Archiving a Switch Restoring a Switch 12. Restore Dialogs Full and Selective Restoring the Factory Default Configuration Factory Default Configuration Settings Factory Default Configuration Settings Downloading a Support File Upgrading the Switch Using License Keys 13. Features License Key Dialog Installing Firmware Displaying Hardware Status 15. Hardware Status LEDs Managing Ports Displaying Port Information Port Types Monitoring Port StatusDisplaying Port Types Displaying Port Operational States Displaying Port SpeedsPort Operational States Port Speeds Displaying Transceiver Media Status Port Transceiver Media View Port Statistics Data Window Entries LIP ALPD,ALPS Port Statistics Data Window Entries Port Information Data Window Entries Port Information Data Window Entries Configuring Ports Port Properties Dialog Changing Port Administrative States Port Administrative States Changing Port Speeds Changing Port Types Stream Guard Scan Device Changing Port Symbolic Name Using the Extended Credits Wizard Resetting a Port Designate Donor Ports Testing Ports Port Loopback Test Dialog Managing Ports Graphing Port Performance Fabric View Graphs Starting SANsurfer Performance Viewer Exiting SANsurfer Performance Viewer Save Default Performance View File Dialog Saving and Opening Performance View Files Changing the Default Performance View File Encryption Key Setting SANsurfer Performance Viewer Preferences Setting the Polling Frequency Displaying Graphs Arranging Graphs in the Display Customizing Graphs Managing Ports Graphing Port Performance Saving Graph Statistics to a File Rescaling a Selected GraphPrinting Graphs Managing Ports Graphing Port Performance 59056-02 a Command Line Interface Logging On to a Switch User Accounts Working with Switch Configurations Modifying a Configuration Backing up and Restoring Switch Configurations Ftp ipaddress Date, configswitch16910112003, for example Commands Command syntax is as followsCommand keyword keyword value Table A-1. Command-Line Completion Table A-2. Commands Listed by Authority Level Admin Session Commands Admin Command AuthoritySyntax Keywords Alias Command Syntax alias Rename aliasold aliasnew Members aliasRemove alias memberlist Config Command Syntax configKeywords activate configname Edit configname Restore Manager Archive function are not compatible with the ConfigRestore command Save configname # ftp symbolicname or ipaddress Download the file to the workstation Create Support Command Admin sessionFollowing is an example of the Create Support command Create support You have transferred 43430 bytes in 1 files Keywords MMDDhhmmCCYY Date CommandSyntax date Feature Command Syntax featureKeywords add licensekey Log Syntax firmware install Firmware Install CommandAuthority Admin Hardreset Command Syntax Help Command Keywords commandSyntax help command keyword Authority None History Command Authority None Syntax history Hotreset Command Hotreset Image Command Ftp Ftp switchname Wait for the unpack to complete Lip Command Following is an example of the Lip commandReinitializes the specified loop port Lip portnumber Passwd Command Syntax passwd accountname Keywords accountname Keywords ipaddress Ping CommandSyntax ping ipaddress Ps Command Following is an example of the Ps commandSyntax Examples Displays current system process information Syntax quit, exit, or logout Quit CommandCloses the Telnet session Reset Command Config configname Zoning Table A-3. Switch Configuration DefaultsSystem Table A-4. Port Configuration Defaults Table A-5. Port Threshold Alarm Configuration Defaults Table A-6. Zoning Configuration Defaults Table A-7. Snmp Configuration Defaults Table A-8. System Configuration Defaults Set Command Syntax set Port option Setup optionSwitch state Set Config Command Set configTable A-9. Set Config Port Parameters Port portnumber Command Line Interface Set Config Command Table A-9. Set Config Port Parameters Table A-10. Set Config Switch Parameters Number of milliseconds the switch Table A-10. Set Config Switch Parameters Table A-11. Set Config Threshold Parameters Threshold Table A-12. Set Config Zoning Parameters Arbff Following is an example of the Set Config Switch command Following is an example of the Set Config Threshold command To discard this configuration use the config cancel command Following is an example of the Set Config Zoning command Attributes Set Log Command Set logArchive Clear Display filter Level filter Port portlist SaveStart Stop Set Port Command Down Port from accepting a device loginDisables the port by removing power from the port lasers Set Setup Command Set setupTable A-13. Snmp Configuration Settings Snmp System Table A-14. System Configuration Settings Table A-14. System Configuration Settings Setup snmp Following is an example of the Set Setup System command SANbox Manager admin # set setup system Show Command Alarm optionKeywords about Broadcast Fdmi portwwn Log option Ns option PagebreakPerf option Table A-15. Show Port Parameters Lipalpdalps Post log Steering domainid Table A-16. Switch Operational Parameters Support Topology Displays all connected devicesUsers Version Following is an example of the Show Domains command Following is an example of the Show Fabric command Following is an example of the Show Fdmi command Following is an example of the Show Fdmi WWN command Following is an example of the Show NS portID command Following is an example of the Show NS local domain commandFollowing is an example of the Show NS domainID command Following is an example of the Show Interface command Collisions0 txqueuelen100 Following is an example of the Show Port command PL-XPL-VC-SG3-22 Following is an example of the Show Switch command Following is an example of the Show Topology command Command Line Interface Show Command Following is an example of the Show Version command Show Config Command Show config Following is an example of the Show Config Switch command Following is an example of the Show Config Threshold command Following is an example of the Show Config Zoning command Show Log Command Show logNumber of events Component Settings LevelOptions Port Following is an example of the Show Log command Following is an example of the Show Log Level commandFollowing is an example of the Show Log Options command Show Perf Command Errors portnumber Following is an example of the Show Perf Byte command Mfg Show Setup CommandShow setup Following is an example of the Show Setup Snmp command Following is an example of the Show Setup System command Shutdown Shutdown CommandPower from the switch Test Command TestPort portnumber testtype Status Admin start Command Line Interface Test Command Authority None Syntax uptime Uptime CommandExamples The following is an example of the Uptime command User Command Following is an example of the User Add command Following is an example of the User Edit command Following is an example of the User Delete command Following is an example of the User List command Whoami Whoami CommandFollowing is an example of the Whoami command Zone Command Syntax zone Members zone Remove zone memberlistRename zoneold zonenew Type zone zonetype Following is an example of the Zone Members command Following is an example of the Zone Zonesets command Zoneset Command Syntax zoneset Zones zoneset Remove zoneset zonelistRename zonesetold zonesetnew History Zoning CommandOpens a Zoning Edit session Limits Table A-17. Zoning Database Limits Following is an example of the Zoning Limits command E1JBOD1 E2JBOD2 Following is an example of the Zoning List command 108 59056-02 a Access Control List Zone Administrative StateAlarm BootP Class 3 Service Configured Zone SetsDefault Visibility Fabric Management Switch Input Power LED Inter-Switch LinkMaintenance Button Maintenance Mode Zoning Database Small Form-Factor PluggableSoft Zone Target Index Index-2 59056-02 a 59056-02 a Index-3 Index-4 59056-02 a 59056-02 a Index-5 Index-6 59056-02 a