SURROUND SETUP (Continued)
Setting Dolby Pro Logic II X mode
This mode provides 7.1 channel sound from 2 channel sources.
1.Press SETUP/MENU button.
~“INPUT” appears on the display and goes into Setup Mode.
2.Press ▲▼ button to select "SURROUND", and then press the
ENTER.
3.Press ▲▼ button to select "PL II x", and then press the ENTER or ▶ button.
4.Press ▲▼ button to select the option you want, and then press the ENTER or ▶ button.
~MODE : Each time you press ▲▼ button, MOVIE MUSIC GAME MATRIX PL will be selected in turn.
MOVIE : Adds realism to the movie soundtrack.
MUSIC : Provides 7.1 channel surround sound for digital, analog or existing stereo sources such as CD, TAPE, FM, TV and stereo VCR.
GAME : Enhances the excitement of the game’s sound.
MATRIX : You will hear 7.1 channel surround sound.
PL : You will experience a surround effect with just the front left and right speakers.
~ PANORAMA : You can set it ON or OFF. (This mode extends the front stereo image to include the surround speakers for an exciting "wraparound" effect with side wall imaging.)
~DIMENSION : You can set from
(Incrementally adjusts the sound field (DSP)from the front or surround.)
~CENTER WIDTH : You can set from 0 to 7.
(This sets the width of the center image. The higher the setting, the less sound comes from the center speaker.)
M ` PANORAMA, DIMENSION and CENTER WIDTH settings are enabled only if the mode is set to "MUSIC".
`You cannot use Dolby Pro Logic llx mode for multi channel signals such as Dolby Digital and DTS.
`Pro Logic works only for PCM audio signals with sampling frequencies of 32KHz, 44KHz or 48KHz.
`Sound will not be output from the surround back speakers if the PCM audio signal is mono.
40