option setup (Continued)
ASC (Auto Sound Calibration)
By setting the ASC function just once when you relocate or install the unit, you can have the unit automatically recognize the distance between speakers, levels between channels, and frequency characteristics to create a
1. | Plug the ASC microphone into the ASC input jack. |
| |
| |||
2. | Place the ASC microphone at the listening position. |
| |
. Press SETUP/MENU button. |
| ||
| |||
. | Press ▲▼ button to select the “OPTION”, and then press the | ||
| |||
| ENTER or ▶ button. |
| |
. Press ▲▼ button to select the “ASC SETUP”, and then press |
| ||
| the ENTER or ▶ button. | | |
. Press the ENTER or ▶ button to select the “ASC AUTO”, and then press the ENTER or ▶ button.
~ To create the optimal 7.1 channel sound field, the selections are in the following sequence:
L ➞ C ➞ R ➞ SR ➞ SBR ➞ SBL ➞ SL ➞ SW
. If you see a message of "READY" on the screen, press the ENTER button to apply the measurement value. And then unplug the ASC microphone.
EnG
● setup
ASC
Microphone
To cancel the ASC (Auto Sound Calibration) setup.
This will be automatically reverted if you press the SETUP/MENU, EXIT or RETURN button.
M ` Setting the ASC function takes about 3 minutes.
`Because the volume level of the tone is fixed during the ASC setup, you cannot adjust the volume using the volume control buttons.
`If the auto sound microphone is disconnected during the ASC setup, the setup will be cancelled.
`When ASC measuring is done with a message of "READY" on the screen, The measurement value will not apply until you press the ENTER button .
`To move up one level from SETUP/MENU or EXIT SETUP when the SETUP mode is released, press the RETURN button.
`You can also press ASC button on the remote control to use this function.
45
