Extron electronic MGP 464 DI manual Preliminary, Quick Start - MGP 464, cont’d, Step, Auto Image

Quick Start — MGP 464, cont’d

d. Rotate the Adjust knobs until the H and V values represent the image dimensions or position coordinates you want for the selected input.

e. Repeat steps c and d as needed to refine the size and position adjustments for the selected input.

f. Repeat steps a through e for the remaining windows for the same input.

g. Repeat steps a through f for each remaining input.

Step 11

Size and position windows as desired for each of your applications and save each one with any one of the remaining 127 window preset names for easy recall of window settings.

You can also save presets using the MGP 464 Web pages (see chapter 5, “Ethernet Configuration and Control”) or the MGP 464 Windows-based control software (see “Using the Windows- based Control Software” in chapter 4, “Software Configuration and Control,” for instructions on accessing the software and its Help file).

PRELIMINARY

Auto Image

As an alternative to step 8 for any window, Auto Image provides a quick way to size an input to fit the current window size.

To auto-size an image,

a. Press the button for the input that you want to auto-size.

b. Press the Menu button to select the Auto Image menu.

c. Press the Next button to display the Auto Image selection screen.

d. Turn either Adjust knob to select a window for Auto Imaging.

e. Press the Next button again to perform an Auto Image in the selected window.

Step 9

Use the Input Configuration menu to make

any desired advanced adjustments, including

Horizontal and Vertical Start, Pixel Phase, Total

Pixels, Active Pixels, and Active Lines. See chapter 3, “Operation,” for information on these adjustments.

Step 10

When finished adjusting the desired picture controls, save your configuration as a window preset:

a. Press the Preset Recall/Save button and hold it for at least 2 seconds.

b. Use either Adjust knob to select the preset number/name to which you want to save this configuration.

c. Press the Enter button.

QS-4 MGP 464 • Quick Start