Extron electronic MGP 464 manual Preliminary, Command/response table for SIS commands continued

MGP 464 • Software Configuration and Control 4-19

Command/response table for SIS commands (continued)

Command	ASCII (Telnet)	Response	Additional description
	(host to switcher)	(switcher to host)
Set test pattern	X50$ J	Tst X50$ ]	Select test pattern X50$. For X50$:

			0	= Off (none)		8 = Crop
			1	= Colorbars		9 = Side By Side (4x3 crop)
			2	= X-hatch (16x12) 10 = Quad Split (4x4)
			3	= 4x4 H-hatch		11 = Pip Images (4x3 PIP col.)
			4	= Grey scale		12 = 1.78 Aspect (4x3/16x9)
			5	= Ramp		13 = 1.85 Aspect (4x3/16x9)
			6	= Alt. pixels		14 = 2.35 Aspect (4x3/16x9)
			7	= White field
View test pattern	J	X50$ ]	View the currently selected test pattern.
Executive mode
Enable executive mode	1X	Exe 1 ]	Lock front panel control except for the input
			buttons; allow RS-232/422 and Ethernet control.
Enable executive mode 2	2X	Exe 2 ]	Lock all front panel controls including input
			buttons; allow RS-232/422 and Ethernet control.
Disable executive mode	0X	Exe 0 ]	Unlock all front panel controls.
View executive mode status	X	0 ]/ 1 ]/ 2 ]	View executive mode status.
Information requests
General information	X50@ * I	Chn X50) • Typ X50# • Std X50( • Blk X% ]
			View input number, video signal type, input signal
			standard, and blanking (muting) status in window
			X50@.
			X50) = 1 through 19.
			X50# = signal type. For X50#:
			1	= RGB		5 = S-video
			2	= YUV-HD		6 = Composite video
			3	= RGBcvS		7 = DVI
			4	= YUVi
			X50( = signal standard. For X50(:
			0	= None	4 = SECAM
			1	= NTSC	– = Not applicable
			2	= PAL
			X% = muting status. For X%:
			1	= muted; 0 = unmuted

Information requests (continued)

PRELIMINARY