Extron electronic MGP 464 DI manual Firmware Upgrade Guide, cont’d, Downloading the firmware

PRELIMINARY

Firmware Upgrade Guide, cont’d

Using the Windows-based configuration software

A third way to find out the firmware version is to access the MGP 464 Windows- based configuration software.

1. Open the configuration software. (See “Windows®-based Control Software,” in chapter 4, for the procedure.)

2. From the Help menu, select About... . The following screen appears, providing information about the current MGP version.

About... screen

3. When finished viewing the information, click OK to close the window.

Downloading the firmware

Obtain the latest version of MGP 464 firmware by downloading it from the Extron Web site, as follows:

1.	Visit the Extron Web site (www.extron.com) and click the Download tab.
2.	On the Download Center page, click the Firmware link on the left sidebar
	menu.
3.	On the Firmware page, scroll down to the “MGP 464” line; or click the letter M
	in the alphabet displayed across the top of the page to display products whose
	names start with M.
4.	Click the Download link located at the far right of the MGP 464 line.

NThe firmware file applies to both the MGP 464 and the MGP 464W, standard and DI versions.

5.	On the next page, fill in the required information, then click the
	Download_MGP464_FWNxNN.exe button (N.NN indicates the firmware
	version number). A File Download - Security Warning window is displayed.
6.	Click Save. A Save As window opens.
7.	Browse to the folder where you want to save the firmware installation file on
	your computer, and click Save.
8.	When ready to install the new firmware, locate the downloaded file, and
	double-click on it to open it.
9.	Follow the instructions on the Installation Wizard screens to install the new
	firmware on your computer. A Release Notes file, giving information on
	what has changed in the new firmware version, and a set of instructions for
	updating the firmware are also loaded.

B-4 MGP 464 • Firmware Upgrade Guide