Extron electronic MGP 464 DI manual Preliminary, Firmware Loader connection tabs

Firmware Loader connection tabs

•RS-232tab — From the drop-down menus, select the appropriate COM port number (obtained from your system administrator) and baud rate

(the default is 9600).

•TCP/IP tab — Enter your MGP’s IP address (obtained from your system administrator), Telnet port (the default is 23), and, if required, password.

6. In the Select a firmware file field on the next screen, enter the path to the new MGP firmware file on your computer, or click Browse to locate and open it. (By default, the firmware file is placed at c:\Extron\Firmware\MGP464 when downloaded from the Extron Web site.)

Firmware Loader file selection screen

7. Click Upload. Messages appear on the firmware file selection window indicating when the unit is uploading the firmware, then resetting itself.

	When the firmware upload process is completed, the message “Transfer
	Complete!” is displayed, and the new firmware version number appears in
	the Current Unit Information field.
8.	Click Exit to close the Firmware Loader.

MGP 464 • Firmware Upgrade Guide B-9

PRELIMINARY