Extron electronic MGP 464 DI manual Firmware Upgrade screen, Preliminary, Edit

PRELIMINARY

HTML Configuration and Control, cont’d

3.	Click the Save button to save the changes. The Save button changes back to
	Edit.

Setting up SMTP authorization

To set the MGP to require SMTP authorization before accepting any e-mail,

1.	To enable the SMTP authorization fields, click the Edit button at the right of
	the Mail IP Address field. The Edit button changes to Save.
2.	Select the SMTP Authorization Required check box, located below the Domain
	Name field. This enables the User Name and Password fields below the check
	box.
3.	In the User Name and Password fields, enter a user name and a password that
	senders must enter in order for the MGP to accept their e-mail messages.

For the User name, you can use any combination of letters, numerals, spaces, and symbols except the comma (,) and the single and double quotation marks (‘ and “). For the password, you can use all characters except the comma. The user name and password can each be from 1 to 30 characters.

NYou must specify both a user name and a password.

4.	Click the Save button next to the Mail IP Address field to save your user name
	and password.

To remove SMTP authorization, click Edit, clear the SMTP Authorization Required check box, then click Save.

Firmware Upgrade screen

The Firmware Upgrade screen enables you to install a new version of firmware to your MGP 464. You can download the latest firmware version from the Extron Web site to your computer. Appendix B provides more details on firmware updating.

Firmware Upgrade screen

Determining the current firmware version

There are two methods you can use to find out what firmware version is currently installed on your MGP 464:

•Using the LCD screen: Watch the LCD window as you connect the MGP 464 to a power source. The first piece of information displayed on the screen is the firmware version (along with the product name).

5-12 MGP 464 • HTML Configuration and Control