Extron electronic MGP 464 DI manual Updating using the Firmware Loader, Preliminary

Firmware Upgrade Guide, cont’d

4.	Double-click on the firmware file icon. The firmware uploading process
	begins. While the firmware is loading, a progress bar is displayed:

PRELIMINARY

Firmware update progress bar

5. When the firmware update is complete, the progress bar closes.

Updating using the Firmware Loader

An alternative way to update the MGP’s firmware is to download and run the Firmware Loader software.

1.	Download the Firmware Loader installer executable file to your computer.
	a.	On the Extron Web page, click the Download tab.
	b.	On the Download Center page, click Software on the left sidebar menu.
	c.	Locate the “Firmware Loader” line and click the Download link at the far
		right.
	d.	Follow the instructions on the download screens to save the installer file
		to your computer.
2.	Locate the Firmware Loader executable file in your computer’s file system
	and open it.
3.	Follow the instructions on the Installation Wizard screens to install the
	Firmware Loader on your computer. The installer program places the
	Firmware Loader file, “FWLoader.exe” at the following location:
	c:\Program Files\Extron\FWLoader
	(If the Extron and FWLoader folders do not yet exist in your Program Files
	folder, the installer creates them.)
4.	Access the FWLoader.exe file via your desktop Start menu by making the
	following selections:
	Start > All Programs > Extron Electronics > Firmware Loader > Firmware
	Loader
5.	On the first screen that appears, select the tab for the desired connection type
	and enter the parameters for your MGP, and click OK.

B-8 MGP 464 • Firmware Upgrade Guide