Extron electronic MGP 464 DI manual Programming and Control, cont’d

4-30 MGP 464

PRELIMINARY

Command/response table for IP SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to processor)	(host to processor)	(Processor to host)
IP setup commands

SIS™

• Software Configuration and Control

Set unit name24 E X1@ CN }

Set unit name to factory default24 E • CN }

Read unit name	E CN }
Set time/date24	E X1# CT }

Read time/date	E CT }
Set GMT offset24	E X# CZ }

Read GMT offset CZ }

W X1@ CN	Ipn • X1@ ]	Change the processor's name to X1@, a name
		of your choosing.
		For X1@: The name can consist of up to 24
		alphanumeric characters (and the minus sign/
		hyphen). The first character must be a letter,
		the last character cannot be a minus sign.
		Case does not matter.
W %20 CN	Ipn • X4( ]	X4( is the name the processor was shipped
		with: MGP464-##-##-##, a combination of the
		model name and the last three pairs of the hex
		numbers in the unit's MAC address
		(e.g., MGP464-00-02-3d).
W CN	X1@ ]	X1@ is the processor's current name.
W X1# CT	Ipt • X1# ]	X1# is the local date and time format. The
		set format is MM/DD/YY-HH:MM:SS. (The
		hours, minutes, and seconds can also be
		separated by periods.)
		Examples: 11/13/06-10:54:00 or
		11/13/06-10.54.00
W CT	X1# ]	The read format is day of week, DD month year
		HH:MM:SS.
		Example: Tue, 18 Nov 2006 18:19:33
W X# CZ	Ipz X# ]	Set the Greenwich Mean Time (GMT) offset
		value (X#) for the processor's location. GMT
		offset (-12.00 to +14.00) represents the time
		difference in hours and minutes (± hh:mm
		relative to Greenwich, England). The plus
		sign and leading zero are optional.
		X# is in the format hh:mm.
		Example: 5:30 or 5.30 = +05:30
W CZ	X# ]

Programming and Control, cont’d