Extron electronic MGP 464 DI manual Preliminary, Software Configuration and Control, cont’d

Software Configuration and Control, cont’d

3.	On the selected tab, enter the information required for the type of
	communication you chose.
	• TCP/IP: Enter your MGP’s IP address, Telnet port (the default is 23), and
	a password if desired.
	• RS-232/422:Select your PC’s communication port from the Port menu,
	and the baud rate from the Speed menu. All other parameters are preset.
4.	Click OK. After a few seconds, the MGP 464 main window opens.

PRELIMINARY

MGP 464 window

5. For information on configuring the MGP 464 using the Windows-based

software, refer to the program’s help. To access the help file, select Contents

from the Help pull-down menu, or press the F1 key.

4-40 MGP 464 • Software Configuration and Control