Extron electronic MGP 464 DI manual Preliminary, Rack mounting procedure, Rack mounting the MGP

•Circuit overloading — When connecting the equipment to the supply circuit, consider the connection of the equipment to the supply circuit and the effect that circuit overloading might have on overcurrent protection and supply wiring. Consider equipment nameplate ratings when addressing this concern.

•Reliable earthing (grounding) — Maintain reliable grounding of rack- mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (such as the use of power strips).

Rack mounting procedure

For optional rack mounting, do not install the rubber feet. To mount the MGP 464 in a rack,

1. Attach the included rack/through-desk mounting brackets (part #70-155-01)to the unit using eight machine screws supplied with the mounting kit. (See the illustration on the next page.)

2. Insert the unit into the rack and align the holes in the mounting brackets with

the holes in the rack. Use four machine screws to attach the brackets to the rack.

PRELIMINARY

MBD 249

2U Rack Mounting Bracket (Use four lower holes.)

Rack mounting the MGP 464

MGP 464 • Installation 2-3