Extron electronic MGP 464 DI manual Quick Start - MGP, Installation, Step, Preliminary

Quick Start — MGP 464

Installation

Step 1

Install the four rubber feet on the bottom of the

MGP 464, or mount the unit using the supplied

rack mounting brackets.

MBD 249

2-U Rack Mount Bracket (Use four lower holes.)

Rack mounting the MGP 464

DVI inputs 1, 2, 3, and 4 — DVI. These inputs

can be used instead of analog inputs 1

through 4. (MGP 464 DI only)

INPUT 1-DVI-D

NAnalog is not available on this DVI-I connector.

Virtual inputs 5 – 19 — Component video, S-video, or composite video (configurable via Windows®-based control software, SIS™ commands, or Web pages only). In each column, you can connect inputs as follows:

•Three composite video inputs

•One S-video and one composite video input

NThe S-video must always be connected to the top two BNCs (Y on top, C second). If desired, a composite video source can be connected to the bottom BNC.

•One interlaced component video source

(connects to all three BNCs in the column).

PRELIMINARY

Step 2

Turn off power to the input and output devices, and remove the power cords from them.

Step 3

Attach the input devices to the MGP 464. The

following input signal types are accepted:

Inputs 1, 2, 3, and 4 — RGB, component

video, S-video, or composite video (fully configurable)

Composite

5

VID Y

6

VID B-Y C

7

VID

R-Y

S-video

and

Composite

5

VID Y

6

VID B-Y C

7

VID

R-Y

Component

5

VID

Y

6

VID B-YC

7

VID

R-Y

	RGBHV
	Video
R/R-Y
G/Y	H/HV
VID
B/C	V
B-Y

RGBS or

RGBcvS

R/R-Y Video

G/Y	H/HV
VID
B/C	V
B-Y

RGsB or

Component R/R-Y Video

G/Y	H/HV
VID
B/C	V
B-Y

Virtual input connection examples

DVI Background input — DVI for live background video only (available on all models).

The four MGP windows are displayed in front of this DVI image. When a DVI

	S-Video
R/R-Y
G/Y	H/HV
VID
B/C	V
B-Y

Composite
	Video
R/R-Y
G/Y	H/HV
VID
B/C	V
B-Y

background is used, the MGP output is locked to the input rate of the DVI

background. This input is not scaled.

NThis input connector can be used only to receive the background image. The input is not scaled or processed. To process DVI input signals, you must use the MGP 464 DI model.

Connecting to inputs 1 through 4

NAnalog is not available on this DVI-I connector.

MGP 464 • Quick Start QS-1