Extron electronic MGP 464 Output Configuration menu, Preliminary, Input Configuration submenu

Input Configuration submenu	Horizontal Knob Adjustment	Vertical Knob Adjustment
Pixel phase 4	Select input #1, 2, 3, or 4 for	Increase or decrease the
The point at which pixels are	window 4.	displayed value to move the pixel
		sampling point for window 4 to
sampled for window 4. (The values
		an optimal sampling point that
cannot be changed for DVI, YUVi,
		ensures output clarity. The range
S-video, or composite video inputs.)
		of settings is 0-31; default is 16.
Total pixels	Select input #1, 2, 3, or 4.	Increase or decrease the width
The width in pixels of the total		in pixels of the total video
		display area of the selected
video display area. (The values
		input. Default is marked with an
cannot be changed for DVI, YUVi,
		asterisk (*).
S-video, or composite video inputs.)
Active pixels	Select input #1, 2, 3, or 4.	Increase or decrease the width
The width in pixels of the active		in pixels of the active video area
		of the selected input. Default is
video area
		marked with an asterisk (*).
Active lines	Select input #1, 2, 3, or 4.	Increase or decrease the height
The height in lines of the active		in lines of the active video area
		of the selected input. Default is
video area
		marked with an asterisk (*).

Output Configuration menu

The Output Configuration menu allows you to set output resolution, refresh rate, output signal type, and sync polarity. The following flow diagram shows the submenus of the Output Configuration menu, and the adjustments that can be made from them.

PRELIMINARY

Input

Configuration

Menu

Output

Configuration

Next	Resol	1024 x 768	Next	Output Type	Next	Sync Polarity		Next
	Refresh	@60 Hz		RGBHV		H –	V –
	Resolution	Refresh rate		Video signal types		Polarity combinations
	See the table on the next page for			• RGBHV (default)		• H –	V – (default)
				• RGBS		• H –	V +
	available combinations of			• RGsB		• H +	V –
	resolutions and refresh rates.
				• YUV Bi-Lvl (Current NTSC standard)		• H +	V +
	Default: 1024 x 768 @60 Hz

• YUV TriLvl (Current HDTV standard) • na*

*Appears when YUV bi-level or tri-level is selected.

Output Configuration menu flow

NThe menus time out and return to the default cycle after 20 seconds of inactivity; however, any selections you made with the Adjust knobs are saved and remain in effect.

MGP 464 • Operation 3-11