Extron electronic MGP 464 DI manual Auto Memories, Memory Presets, Window presets, Preliminary

Auto Memories

Whenever changes are made to the settings described in the previous pages, the MGP automatically saves the changes in memory. These settings are saved based on the input frequency and are later recalled when the identical resolution is applied to the configured input. These memory locations are separate from the input presets.

The following settings are saved by the auto memory feature:

Pixel phase	Percentage of window filled*
Total pixels	Brightness
Active pixels	Contrast
Active lines	Color
Vertical start	Tint
Horizontal start	Detail

*Image size and position are saved as a percent of the window, so that the auto memory can be used for any size window.

Memory Presets

A preset is a set of window or input parameters that you create and save as a file in MGP memory. You can recall a saved preset and implement its settings at any time. A preset enables you to save time by applying a group of settings to your MGP at one time.

Window presets

The MGP 464 allows up to 128 window presets that save information for all the windows. Use the Preset Save/Recall and Enter buttons on the front panel to save and recall presets. Window presets can also be saved, recalled, and named using the Windows-based control software or SIS commands via the RS-232/422 interface or an Ethernet connection (see chapter 4, “Software Configuration and Control”), or by accessing the product Web pages using an Ethernet connection (see chapter 5, “HTML Configuration and Control”).

The following settings can be saved in a window preset:

Window border color	Background setting
Window priority	Window size/position
Window mute status	Image size/position in the window
Label text color	Brightness
Label text size	Contrast
Label location	Color
Label border color	Tint
Label background color	Detail

Saving a window preset

To save a window preset using the front panel buttons,

1.	Set the parameters listed above as desired for windows 1, 2, 3, and 4.
2.	Press and hold the Preset Recall/Save button for at least 2 seconds. The LCD
	screen displays the following:

WINDOW PRESET

Save To #001

3. Rotate either Adjust knob to select one of the 128 available window preset locations in which to save the settings.

MGP 464 • Operation 3-23

PRELIMINARY