Extron electronic MGP 464 DI manual Preliminary, Operation, cont’d, Window Border submenus

PRELIMINARY

Operation, cont’d

Window Border submenus

Use these submenus (one for each window) to select colored borders for the four windows. Turn either Adjust knob to display the available options: Red, Green, Blue, White, Magenta, Cyan, Yellow, and Black. You can also select Off, which specifies no border. The defaults are Red for window 1, Green for window 2, Blue for window 3, and Magenta for window 4.

Window Effect submenu

Use this submenu to select a transition effect for the MGP 464 to use when muting and unmuting windows. To select a transition effect,

1.	Press the Menu button repeatedly until Window Configuration is displayed
	on the LCD screen.
2.	Press the Next button repeatedly until Window Effect is displayed.
3.	Rotate either the horizontal Adjust ([) or the vertical Adjust knob ({) to
	select a transition effect.

Available effects

Cut — A cut instantly mutes or unmutes the window. The effect duration does not apply.

Dissolve — A dissolve causes the window to fade in or out.

Dissolve

Standard wipe — A standard wipe causes the new window to appear to unroll over the other one. The new window can roll from the top, bottom, left, or right.

A standard wipe can have a soft (fuzzy) or a hard (sharp) leading edge.

Center wipe — A center wipe causes the new window to appear to unroll over the other one in one of two ways:

•In from the top and bottom edges to the center of the window

•Out from the center to the top and bottom edges of the window

A center wipe can have a soft (fuzzy) or a hard (sharp) leading edge.

3-14 MGP 464 • Operation