Extron electronic MGP 464 DI manual Preliminary, Setting window priority

Border — In this section you can make selections from the following menus to specify parameters for the text label or for the border on the selected window. You can specify a different color for each window if desired.

Window Border Color: Select a color for the border around the entire window display. The defaults are Red, Green, Blue, and Magenta for windows 1, 2, 3, and 4, respectively. Off specifies that there is no window border.

Text Border Color: Select a color for the border surrounding the text label. The default is Black.

Text Background Color: Select a color for the text label background. The default is White.

•Off specifies that there is no special background for the text label; only the window background is behind the text. (The window background is specified from the Advanced Configuration menu.)

•Translucent specifies that the window background shows through the text background with a cloudy effect.

Text — In this section you can make selections from the following menus to specify parameters for the label text in the selected window.

Text Color: Select a color for the text in the label displayed in the window. The default is Black.

Text Location: Select the area on the screen in which a text label is displayed on all windows. The default is None, which specifies that no text label is displayed.

Text Size: Select Small, Medium, or Large for the size of the text label on the selected window.

Setting window priority

The Window Priority section of the Window Settings screen lets you set the priority for each of the four windows individually. Follow these steps to set window priority:

1. From the “1st” pull-down menu in the Window Priority section, select the window to which you want to give first priority. The window that you select here covers or overlaps all the other windows on the screen unless it is muted.

2. From the “2nd,” “3rd,” and “4th” menus, select the window to which you want to assign second, third, and fourth priority, respectively.

3. When finished selecting from the priority menus, click Set to establish your priority selections.

NIf you assign the same window two priorities, your selections are not implemented when you click Set, and the priority fields return to their previous selections.

PRELIMINARY

MGP 464 • HTML Configuration and Control 5-9