Extron electronic MGP 464 DI Preliminary, cont’d, SIS Programming and Control, Command, Response

4-26 MGP 464 • Software Configuration and

PRELIMINARY

Command/response table for IP SIS commands (continued)

Command	ASCII (Telnet)	URL Encoded (Web)	Response	Additional description
	(host to processor)	(host to processor)	(Processor to host)
Ethernet data port
Set current connection port timeout	E 0 * X6( TC }	W 0 %2A X6( TC	Pti 0 * X6( ]	Set number of seconds (in tens of seconds)
				before timeout on IP connections.
				X6( = 1 through 32767.
View current connection port timeout	E 0TC }	W 0TC	X6( ]
Set global IP port timeout	E 1 * X6( TC }	W 1 %2A X6( TC	Pti 1 * X6( ]
View global port timeout	E 1TC }	W 1TC	X6( ]
Firmware version requests

NAn asterisk (*) after the version number in these commands indicates which version is currently running. A caret (^) indicates bad checksum/invalid load. Question marks (?.??) indicate that the firmware version is not loaded.

Query firmware version	Q or 1QQ	Q or 1Q	X1! ]	Show the MGP's firmware version number
				X1! to two decimal places. Gives the number
				of the currently running version of the user-
				updatable firmware.

SIS™ Programming and Control,

Control

Example:	1Q	1Q
Query verbose version information	0Q	0Q

Example: 0Q 0Q

With tagged response – verbose modes 2 and 3: Ver01 * X1! ]

1.01

Sum of responses from 2Q-3Q-4Q ]

Show bootstrap, factory-installed, and updated firmware versions. (See 2Q, 3Q, and 4Q, on the following lines.)

With tagged response – verbose modes 2 and 3:

Ver00 * Sum of responses from 2Q-3Q-4Q ]

1.00-0.00(1.48-MGP464 Series -Wed, 23 Jan 2003 18:37:59 GMT)-2.02* (1.66-MGP464 Series -Wed, 17 Oct 2007 17:50:01 GMT)

cont’d

Query bootstrap version	2Q	2Q	X1! ]	The bootstrap firmware is not user-
				replaceable, but you may need this
				information for troubleshooting.
			With tagged response – verbose modes 2 and 3: Ver02 * X1! ]
Query factory firmware version	3Q	3Q	X1! (plus web ver.-desc-UL date/time) ]
				Factory-installed firmware is not user-
				replaceable. This firmware was installed at
				the factory; it is the version the processor
				reverts to after a mode 1 reset (see chapter 3).
			With tagged response – verbose modes 2 and 3:
			Ver03 * X1! (plus web ver.-desc-UL date/time) ]
Example:	3Q	3Q	1.00(1.07-MGP464Series-Wed, 16 Jan 2006 03:28:10 GMT)
				In this example, the factory firmware version
				is 1.00, also known as the kernel version 1.07,
				for the MGP 464, dated 16 January, 2006.