Extron electronic MGP 464 DI manual Preliminary, Email Alerts screen top portion

Email Alerts screen

The Email Alerts screen enables you to set up the MGP 464 to automatically send e-mail alert messages when any of its settings are changed. You can enter up to 64 e-mail addresses to alert recipients that an event has occurred.

You can also specify that SMTP (Simple Mail Transfer Protocol) authorization is needed for the MGP to accept incoming e-mail. This prevents spam from taking up space in the MGP’s e-mail system.

PRELIMINARY

Email Alerts screen (top portion)

Setting up e-mail alerts

To set up the system to send e-mail alerts when MGP settings are changed,

1. On the sidebar menu on the Configuration tab, click Email Alerts.

2. On the Email Alerts screen, click the Edit button located to the right of the

	Mail IP Address and Domain Name fields. The button changes to Save.
3.	Enter your MGP 464’s IP address and your domain name in the appropriate
	fields. (This information is available from your network administrator.)
4.	If your MGP has a password assigned, enter it.
5.	Click the Save button.

To set up e-mail addresses for notification, do the following for each recipient of e-mail alerts:

1.	Click the Edit button at the right end of the address row. The Edit button
	changes to Save.
2.	Enter the e-mail address of the recipient, and the file name on your computer
	(.eml extension) that contains the message.

MGP 464 • HTML Configuration and Control 5-11