AND | MODES |
POWER | |
|
|
User's Manual
2. Insert the battery pack.
BATTERY PACK
Figure
3. Secure the battery pack lock.
Starting the computer by password
If you registered a password as supervisor or user, you must enter it to start the computer. For more information about how to set a password, refer to Chapter 7, HW Setup and Passwords.
To start up the computer with the password, follow these steps:
1.Turn on the power as described in Chapter 3, Getting Started and the follow- ing message appears:
Password =2.Enter the password.
3.Press Enter. The computer displays the message below while it starts up.
Valid password entered, system is now starting up.NOTE: If you enter the password incorrectly three times in a row, the computer shuts off. In this case, you must turn the computer back on to retry password entry.