Toshiba TE2000 manual Parallel/Printer, Pointing Devices

HW SETUP AND PASSWORDS

User's Manual

Parallel/Printer

This tab lets you set the Printer Port Type. Use the Windows Device Manager to make settings for the Parallel port.

Parallel Port Mode

The options in this tab are ECP and Standard Bi-directional.

ECP Sets the port type to Extended Capabilities Port (ECP). For most printers, the port should be set to ECP. (Default)

Standard This setting should be used with some other parallel Bi-directionaldevices.

Pointing Devices

Pointing Devices

This tab lets you select Auto-Selectedand Simultaneous.

Auto-SelectedIf a PS/2 mouse is connected to the computer when you turn on the power, the PS/2 mouse is enabled and the AccuPoint II is disabled. Otherwise, the AccuPoint II is enabled. (Default)

Simultaneous Enables both the AccuPoint II and a PS/2 mouse.

Display

This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.

Power On Display

Lets you set the display to be used when the computer is booted.

Auto-SelectedSelects an external monitor if one is connected. Otherwise, it selects the internal LCD. (Default)

Simultaneous Selects both the internal LCD and external monitor for simultaneous display.

7-6