OPERATING BASICS

User's Manual

AccuPoint II precautions

Certain conditions can affect the on-screen pointer when using AccuPoint II. For example, the pointer may travel contrary to AccuPoint II operation or an error message may appear, if

❑You touch the AccuPoint II during power-up.

❑You apply constant, soft pressure during power-up.

❑There is a sudden temperature change.

❑Strong stress is applied to the AccuPoint II.

If an error message appears, reboot the computer. If an error message does not appear, wait a moment for the pointer to stop, then continue operation.

Replacing the cap

The AccuPoint II cap is an expendable item that should be replaced after prolonged use. This is one spare AccuPoint II cap supplied with the computer.

1.To remove the AccuPoint II cap, firmly grasp the cap and pull it straight up.

ACCUPOINT II CAP

PEG

Figure 4-2 Removing the AccuPoint II cap

2. Position a new cap on the peg and press it into place.

NOTE: The peg is square, so be careful to align the cap’s square hole with the peg.

4-2