HW SETUP AND PASSWORDS

User's Manual

CD-ROM −>

LAN −>

HDD −>

FDDThe computer looks for bootable files in the

 

 

 

following order: CD-ROM*, LAN, HDD,

 

 

 

diskette drive.

CD-ROM −>

LAN −>

FDD −>

HDDThe computer looks for bootable files in the

 

 

 

following order: CD-ROM*, LAN, diskette

 

 

 

drive and HDD.

You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting:

USelects the USB diskette drive.

NSelects the Network.

1Selects the primary HDD.

2Selects the secondary HDD.

PSelects the PC card HDD.

CSelects the CD-ROM*. This procedure does not affect the settings.

*In this computer, CD refers to the DVD-ROM or CD-RW/DVD-ROM drives.

NOTES: 1. PC card HDD boot is supported only by slot 0 on the computer. Support is guaranteed only for TOSHIBA PC card HDDs.

2.When you assign a PC card HDD top priority, “PC” is not displayed. However, the PC card HDD takes the position of HDD in the Boot Priority Options list above.

Power on Boot Select

When this option is enabled, you can change the boot drive during start up. The following message will appear for one or two seconds Press [F12] for the boot drive selection menu.

Enabled (Default)

Disabled

To change the boot drive, follow the steps below.

1. Press F12 while the above message is on the screen.

7-8

Page 153
Image 153
Toshiba TE2000 manual Following order CD-ROM*, LAN, HDD