Toshiba TE2000 manual Internal Modem Guide, Installing the modem board, Appendix H

Appendix H

Internal Modem Guide

This appendix describes how to install and the remove the internal modem.

CAUTION: Do not disassemble the computer beyond the steps described in this instruction or touch any components not specifically described.

Installing the modem board

NOTE: The internal modem is preinstalled. The following is for informa- tion only.

To install the modem board, follow the steps below.

1.Save your data, quit Windows and turn off the power.

2.Disconnect the AC adaptor and any other peripheral devices.

3.Turn the computer upside down and remove the battery pack.

4.Remove one screw securing the modem cover and remove the cover.

5.Remove two screws, which you use later to secure the modem board.

6.Seat the modem board.

7.Connect the modem board cable.

8.Secure the modem board with two screws removed in step 5.

9.Seat the modem board cover and secure it with one screw.

10.Install the battery pack.

PPENDIXA H

H-1