Removing the modem board, User’s Manual | Toshiba TE2000 specification

APPENDIX H

User’s Manual

Removing the modem board

To remove the internal modem.

1.Save your data, quit Windows and turn off the power.

2.Disconnect the AC adaptor and any other peripheral devices.

3.Turn the computer upside down and remove the battery pack.

4.Remove one screw securing the modem cover and remove the cover.

5.Remove two screws securing the modem board.

6.Lift out the modem board.

7.Disconnect the modem board cable.

8.Secure the modem board with two screws removed in step 5.

9.Seat the modem board cover and secure it with one screw.

10.Install the battery pack.

The internal modem is approved by Japan Approvals Institute for Telecommu-

nications Equipment.

A00-0940JP

H-2

Image 252

Toshiba TE2000 manual Removing the modem board, User’s Manual

Contents

Toshiba TE2000 Portable Personal Computer User’s Manual Copyright DisclaimerTrademarks Modem warning notice Vcci Class B InformationConformity Statement Network Compatibility Statement Japan regulationsRegion selection Redial Type of service Telephone company proceduresPursuant to FCC CFR 47, Part If problems arise Instructions for IC CS-03 certified equipmentDisconnection Fax brandingPage Modem warning notice for Australia AT&F AT&W AT%TE=0 ATZ Any 30 minute period for any single manual call initiation, General conditions Information to Wireless LAN User Wireless InteroperabilityWireless LAN and your Health Regulatory Information Canada Industry Canada IC Europe EU Declaration of Conformity Et 11 2462 MHz USA-Federal Communications CommissionFCC Interference Statement Using this equipment in Japan TaiwanPage Electronic communication device authorization Device AuthorizationRegulatory statements General United States of America and Canada Canada IC NoticeFCC Interference Statement Page Toshiba DVD-ROM drive SD-C2502** safety instruction Location of the required label Stråling Matsushita CD-R/RW drive UJDA340** safety instruction Locationofofthetherequiredlabellabel Stråling Matsushita CD-RW/DVD-ROM drive UJDA720** safety instruction Locationion of the required label of the required label To EN60825 Toshiba CD-RW/DVD-ROM drive SD-R2102** safety instruction Location of the required label Stråling Teac DVD-ROM drive DV-28E** safety instruction To EN60825 Teac CD-ROM drive CD-224E** safety instruction Location of the required label NÅR SIKKERHEDSAF-BRYDER ER Teac CD-R/RW drive CD-W28E** safety instruction Location of the required label Stråling Hitachi DVD-ROM drive GDR-8081N** safety instruction 26-5, Toranomon 1-CHOME, MINATO-KU, Tokyo Japan To EN60825 Page Table of Contents Getting Started Operating BasicsXlii Power and Power-Up Modes Power conditions XliiiKeyboard HW Setup and Passwords Optional DevicesXliv Troubleshooting Xlv Appendixes Glossary Index Manual contents Preface Conventions AbbreviationsIcons Keys Key operation DisplayMessages XlixPage General Precautions Stress injury Heat injuryPressure or impact damage PC card overheating Lii Equipment checklist IntroductionChapter Windows 2000 Service Pack Windows XP Features FeaturesProcessor Memory Disks Display Keyboard Power AccuPointPorts Slots MultimediaCommunications Slim Select Bay SecuritySoftware Special features Special features Utilities Utilities Double-click the Mouse icon Options Options Slim Select Bay options Introduction Grand Tour Front with the display closed Left side Video-out jack PC card slot Right side Right side Back side Underside Underside Grand Tour Front with the display open Front with the display open Indicators Power source/system indicators Power source/system indicators Indicators Keyboard indicator Keypad overlay indicators AC adaptor Slim Select Bay modulesSlim Select Bay modules Indicator DVD-ROM drive CD-ROM drive CD-R/RW drive CD-RW/DVD-ROM drive Slim Select Bay HDD adaptor 12 The Slim Select Bay HDD adaptor Slim Select Bay 2nd battery pack Weight saver Getting Started Setting up your work space Placement of computerGeneral conditions Seating and posture Posture and positioning of the computer Lighting Work habits Connecting the AC adaptor Opening the display Connect the power cord to the AC adaptor Turning on the power Turning on the power Windows XP Professional/2000 setup Windows 98 setupTurning off the power Shut Down mode Boot mode Hibernation mode Benefits of hibernation Starting Hibernation Automatic Hibernation Standby mode Data save in hibernation modeBenefits of standby Restarting the computer Executing standbyStandby limitations Restoring the Windows system Software decompression window Getting Started Using AccuPoint Operating Basics AccuPoint II precautions Replacing the cap Changing Slim Select Bay modules Removing a moduleChanging Slim Select Bay modules Using optical media drives Installing a moduleCD-ROM drive DVD-ROM drive Using optical media drives Loading CDsCD-R/RW drive Read Write Manual release with the eject hole Inserting a CD Removing CDs Closing the drawer CD/DVDs care 10 Removing a CD Using 3 1/2 external diskette drive 11 The 3 1/2 external diskette drive Connecting 3 1/2 diskette drive Using 3 1/2 external diskette drive Disconnecting 3 1/2 diskette drive Diskette care Wireless communications Wireless LANWireless communication switch Wireless communications Wireless communication LED LED status Indication Connecting cable LAN cable types Disconnecting cable Super Long Life scheme Network Device Switch 14 The Super Long Life Properties window Using the internal modem Region selection Using the internal modem Properties menu Setting AutoRun ModeModem Selection Location list for region selection Connecting Dialing Properties Cleaning the computer DisconnectingMoving the computer Heat dispersal Heat dispersal Operating Basics Keyboard Typewriter keys F1 … F12 function keys Soft keys Fn key combinationsEmulating keys on enhanced keyboard Soft keys Fn key combinations Hotkeys Soft keys Fn key combinations Windows special keys Keypad overlayEmulating Fn key on external keyboard Fn Sticky key Arrow mode Numeric modeTurning on the overlays Temporarily using normal keyboard overlay on Temporarily using overlay overlay offTemporarily changing modes Generating Ascii characters Keyboard Power and Power-Up Modes Power conditions LED 2nd battery off Power conditions Power indicators Battery indicatorsDC in indicator Battery types Power indicatorMain battery Battery types Secondary battery option Real time clock battery Care and use of the battery pack Safety precautionsCare and use of the battery pack Procedures Battery charging noticeCharging the batteries Time Monitoring battery capacity Maximizing battery operating time Retaining data with power off Extending battery life Replacing the battery pack Removing the battery pack Installing the battery pack Replacing the battery pack Starting the computer by password Password = HW Setup and Passwords HW SetupAccessing HW Setup HW Setup window HW setup window Windows XP HW Setup There are also three buttons OK, Cancel and Apply Password User Password Device Config Device Configuration Parallel/Printer Pointing Devices Boot Priority CPU Following order CD-ROM*, LAN, HDD Boot command, then the HDD installed USB Supervisor password Supervisor password Passwords Power devices Optional DevicesCards/memory Peripheral devices Installing a PC card PC cardsUser’s Manual Removing a PC card PC cards Installing memory module Memory expansion Memory expansion Removing the cover Removing memory module Seat the cover and secure it with two screws Additional battery pack Slim Select Bay 2nd battery packSlim Select Bay 2nd battery pack Installing Removing Battery charger Additional AC adaptorSlim Select Bay HDD adaptor Slim Select Bay HDD adaptor 12 Installing the HDD USB diskette drive Advanced Port ReplicatorAdvanced Port Replicator Set the Parallel Port Mode and press OK Parallel printer External monitor External monitor Television PS/2 mouse PS/2 keyboard PS/2 keyboard Security lock 15 Security lock Troubleshooting Problem solving processPreliminary checklist Analyzing the problem Hardware and system checklist Hardware and system checklistSystem start-up Power Self test Overheating power down AC powerProblem Procedure Battery Problem Procedure Password LCD panel Hard disk drive Foreign object in the drawer could block laser DVD-ROM drive Grand Tour ProblemProcedure Diskette drive Infrared port Printer Pointing device AccuPoint Serial mouse ProblemProcedure PC card Monitor TV output signal Sound system USB Modem Hibernation No Carrier Memory expansion LAN Where to write Toshiba supportBefore you call Toshiba support Europe Germany & Austria Troubleshooting Specifications Physical DimensionsPower Requirements Appendix a Built-in Modem Network control unit NCU Display Controller and Modes Display controllerAppendix B Video modes Table Video modes Appendix B 640 x 64K of 64K 60Hz Grph Pels 75Hz 85Hz AT Commands Repeat last commandAppendix C +++ Escape sequence Bn Communication standard setting Dn Dial En Echo command Hn Hook controlRequest ID information Mn Monitor speaker mode Nn Modulation handshake On Return on-line to data mode Select pulse dialingQn Result code control Vn DCE response format Xn Result code selection, call progress monitoring Dial tone detect Busy tone detectZn Recall stored profile Cn Data Carrier Detect DCD control Load factory settings Dn DTR control Self-test commands Gn V.22bis guard tone controlKn Local flow control selection Select Pulse Dial Make/Break Ratio WW Display Current Configuration Store current configurationZn=x Store telephone number Nn\ Error control mode selection \Qn Local flow control selection View numbers in blacklist Cn Data compression control Ppendixa Registers Register valuesAppendix D ATSn? S3 Command line termination character S0 Auto answer ring numberS1 Ring counter S2 AT escape character user defined S5 Command line editing character user defined S4 Response formatting character user definedS6 Wait before dialing S7 Connection completion time-out S8 Comma pause timeS11 Dtmf dialing speed S12 Escape guard time S37 Dial line rate AT command set result codes Result code summary Result Code Numeric Description Result Code Numeric Description Appendix D Mode Appendix EFunction Transmission speed Table E-1 Result codes for a V.90 connection AT Command Appendix E Appendix E Wireless LAN About Toshiba Wireless solutionAppendix F Figure F-1 Peer-to-peer Wireless workgroup Peer-to-peer workgroup Enterprise networking Appendix F Easy configuration Wireless LAN card features Wireless LAN card types Wireless LAN cardsBasic settings for enterprise networks Click Settings, and then Control Panel Value ANY Basic settings for peer-to-peer workgroups Set the correct Network Name and Encryption Key Working with Wireless and Windows Using your Wireless LAN cardRadio antennas View other computers Using the Client Manager Entire Network icon View Wireless link quality Icon Description Color View/modify Wireless LAN card settings Figure F-6 Edit Wireless Configuration Settings Advanced configurations Encryption window Advanced window Figure F-8 Advanced window Admin window Figure F-9 Admin parameters Card specifications Storage 10 to 60 C Radio characteristics Table F-5 Radio characteristics Supported frequency sub-bands 2457 AC Power Cord Connectors Appendix G USA and Canada Australia Europe Installing the modem board Internal Modem GuideAppendix H Removing the modem board Parts Numbers Appendix LAN Glossary Glossary-1 AccuPoint Glossary-2 Byte Glossary-3 Cache memory Glossary-4 Delete Glossary-5 Device driver Glossary-6 Host computer Glossary-7 Hot dock/undock Glossary-8 Modem Glossary-9 Monitor Glossary-10 RAM Glossary-11 Restart Glossary-12 Write protection Glossary-13 Glossary-14 Index Index-1 Index-2 Index Index-3 Index-4 Index-5 Index-6