Toshiba TE2000 manual Using the internal modem, Region selection

OPERATING BASICS

User's Manual Using the internal modem

Depending on the settings in the TOSHIBA Power Saver utility, the following four events can trigger a change in the Power Savings settings. To avoid these automatic changes, clear the Control device power management checkbox in the Power Saver utility. For details, refer to the Power Saver utility’s help files.

1.You start the computer on battery power.

2.You start the computer with the AC adapter connected and disconnect the AC adapter during operation.

3.You change the Power Saver settings.

4.The computer resumes operation in suspend or hibernation mode.

Using the internal modem

This section describes how to make settings and connect the modem. Refer to the computer’s online help files for more information. Refer also to the online help files for your modem software.

NOTE: The internal modem does not support the voice functions described in the help files. All data and fax functions are supported.

CAUTIONS: 1. In case of a lightning storm, unplug the modem cable from the telephone jack.

2.Do not connect the modem to a digital telephone line. A digital line will damage the modem.

Region selection

Telecommunication regulations vary from one region to another, so you will need to make sure the internal modem’s settings are correct for the region in which it will be used.

1.a. In Windows® XP, click start, point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility.

NOTE: Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/Region in the Control Panel, the change may not take effect.

b.In Windows® 2000, click Start, point to Programs, point to TOSHIBA Internal Modem and click Region Select Utility.

4-18