Advanced Port Replicator

USB diskette drive

The 3 1/2" external diskette drive module can be connected to the USB port. For details on connecting the 3 1/2" external diskette drive module, refer to Chapter 4, Operating Basics.

Advanced Port Replicator

In addition to the ports available on the computer, the Port Replicator provides, audio line-out jack, line-in jack and separate ports for PS/2 mouse and PS/2 keyboard. The Port Replicator connects directly to the docking interface on the bottom of the computer. The AC adaptor connects the Port Replicator to a power source.

CAUTION: The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer’s default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures.

The following ports and accessories are available on the Port Replicator.

❑One RJ45 LAN jack

❑One RJ11 Modem jack

❑External monitor port

❑Parallel port

❑Serial port

❑PS/2 mouse port

❑PS/2 keyboard port

❑DC IN socket

❑Security lock slot

❑Audio line-in, line-out jacks

❑Universal Serial Bus (two) ports

❑i.LINK (IEEE 1394) port (This port is not supported by the computer.)

❑DVI port (This port is not supported by the computer.)

NOTES: 1. When a Port Replicator is connected to the computer, remove all cables connected to the computer.

2.The TE2000 does not support the DVI and i.LINK ports on the Port Replicator.

8-11

PTIONALO

DEVICES