Toshiba TE2000 manual Disconnecting cable, Super Long Life scheme

OPERATING BASICS

User's Manual Using the internal modem

2.Plug one end of the cable into the LAN’s jack. Press gently until you hear the latch click into place.

Figure 4-13 Connecting the LAN cable

3.Plug the other end of the cable into a LAN hub connector. Check with your LAN administrator before connecting to a hub.

Disconnecting cable

To disconnect the LAN cable, follow the steps below.

1.Pinch the lever on the connector in the computer and pull out the connector.

2.Disconnect the cable from the LAN hub in the same manner. Check with your LAN administrator before disconnecting from the hub.

Super Long Life scheme

The Super Long Life mode is a scheme of the TOSHIBA Power Saver utility. It is designed to maximize battery operating time, therefore, when it is enabled all LAN functions, both wired and wireless, are disabled.

The Super Long Life power saving scheme is not selected as a default.

NOTE: Wired and wireless LAN functions are disabled in the default settings. To enable the settings, you must check the Control device power management checkbox. Right-click the device name to change the status. If the checkbox is not checked, you will not be able to change the device status. Refer to TOSHIBA Power Saver utility help files for details.

4-16