2569.1 en
EN |
| Annex 1 (Continued) |
|
|
|
TV menu |
|
Installation | Software upgrade |
Languages | Current softw. info |
Channels | Local upgrades |
Preferences | Announcement |
Connections |
|
Factory settings |
|
Software upgrade |
|
Info |
|
Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file in a directory called “Upgrades” located in the root of the USB portable memory.
Rename this file as “firmware_upgrade.upg”.
1.Insert the portable memory that contains the downloaded software upgrade.
2.Select Software upgrade in the Installation menu. Go to Local upgrades.
The TV will list all compatible software available on the USB portable memory and display the data for each selected upgrade version.
3.Select the correct upgrade version and press the red colour key to start the upgrade.
Your TV will restart and will automatically go to the upgrade mode. After a few seconds it will display the status of the upgrade procedure.
Warning: if you try to upgrade to a software version equal or lower than the current version, a confirmation will be asked. Downgrading to older software should only be done in case of real necessity.
4.When the software upgrade was successful, remove the USB portable memory and restart your TV with the power switch B at the side of the TV.Your TV will start up with the new software.
50
