Dell R300 owner manual SATA Configuration Screen, Integrated Devices Screen

SATA Configuration Screen

Table 2-5 lists the options and descriptions for the information fields that appear on the SATA Configuration screen.

NOTE: When a SAS Card is installed in the system, the SATA Configuration screen changes. The SATA controller field displays ATA Mode and will be unchoosable. Port A, Port B, Port C, and Port D display off and are also unchoosable. When the SAS Card is plugged out, the SATA Configuration screen settings will be loaded to default values.

Table 2-5. SATA Configuration Screen

Option	Description
Port A	Displays the model number, drive type, and size of the
(Auto default)	device attached to Port A. When set to Auto (default), the
	port is enabled if devices are attached to the port.
Port B	Displays the model number, drive type, and size of the
(Off default)	device attached to Port B. When set to Auto (default), the
	port is enabled if devices are attached to the port.
Port C	Displays the model number, drive type, and size of the
(Off default)	device attached to Port C. When set to Auto (default), the
	port is enabled if devices (optional diskette drive) are
	attached to the port.

Integrated Devices Screen

Table 2-6 lists the options and descriptions for the information fields that appear on the Integrated Devices screen.

Table 2-6. Integrated Devices Screen Options

Option	Description
Internal USB Port	Enables or disables the system’s internal USB port.
(On default)

Embedded Gb NICx (NIC1 default: Enabled with PXE;

Other NICs: Enabled)

Enables or disables the system's integrated NIC. Options are Enabled, Enabled with PXE, Enabled with iSCSI Boot, and Disabled. PXE support allows the system to boot from the network. Changes take effect after the system reboots.

Using the System Setup Program

51