5Insert the expansion card firmly into the
NOTE: Ensure that the
6Replace the
7Slide the
8Connect any internal or external cable(s) to the expansion card.
NOTE: You will need to remove the riser card in order to install expansion cards with internal connectors. See "Riser Cards" on page 97.
9Close the system. See "Opening and Closing the System" on page 68.
Removing an Expansion Card
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.
1Open the system. See "Opening and Closing the System" on page 68.
2Disconnect any internal or external cable(s) that are connected to the expansion card.
3Lift the
4Slide the
5Grip the edges of the expansion card with the fingers of both hands and carefully work the card out of the
6If you are permanently removing the card, replace the metal filler bracket over the empty
NOTE: Filler brackets must be installed over empty
7Replace the
8Close the system. See "Opening and Closing the System" on page 68.
96
Installing System Components