Dell R300 owner manual System Board Jumpers, System Board Connectors, 155, Jumpers and Connectors

Jumpers and Connectors

This section provides specific information about the system jumpers and describes the connectors on the various boards in the system.

System Board Jumpers

Figure 6-1 shows the location of the configuration jumpers on the system board. Table 6-1 lists the jumper settings.

Table 6-1. System Board Jumper Settings

Jumper	Setting		Description
PWRD_EN		(default)	The password feature is enabled.
			The password feature is disabled.
NVRAM_CLR		(default)	The configuration settings in NVRAM are
			retained at system boot.
			The configuration settings in NVRAM are
			cleared at next system boot.

System Board Connectors

See Figure 6-1 and Table 6-2 for the location and description of the system board connectors.

Jumpers and Connectors

155