Dell R300 E1410, Cpu # Ierr, support.dell.com for the, E1414 CPU #, Thermtrip, E1418 CPU #

Table 1-6. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1410	CPU # IERR	Specified microprocessor is	See your system’s
		reporting an internal error.	"Information Update
			Tech Sheet" located on
			support.dell.com for the
			most current system
			information. If the
			problem persists, see
			"Getting Help" on
			page 165.

E1414 CPU #	Specified microprocessor is
Thermtrip	out of acceptable
	temperature range and has
	halted operation.

E1418 CPU #	Specified processor is
Presence	missing or bad, and the
	system is in an unsupported
	configuration.

See "Troubleshooting System Cooling Problems" on page 134. If the problem persists, ensure that the microprocessor heat sinks are properly installed. See "Troubleshooting the Microprocessors" on page 149.

NOTE: The LCD continues to display this message until the system’s power cord is disconnected and reconnected to the AC power source, or the SEL is cleared using either Server Assistant or the BMC Management Utility. See the Dell™ OpenManage™ Baseboard Management Controller User’s Guide for information about these utilities.

See "Troubleshooting the Microprocessors" on page 149.

About Your System

25