Dell R300 owner manual Removing the System Board Shroud

Removing the System Board Shroud

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

1Open the system. See "Opening and Closing the System" on page 68.

2If applicable, disconnect the SAS cable connector on the expansion card.

3Locate the attachment slots on the left and right sides of the fan modules and in front of the memory modules. See Figure 3-5.

4Grasping the right and left sides, gently lift the shroud straight up and away from the fan assembly. See Figure 3-5.

5Remove the system board shroud.

Installing System Components

71