Dell R300 owner manual Displays information related to microprocessors speed

Table 2-2. System Setup Program Options (continued)

Option	Description
Memory Information	Displays a screen to view memory information and to
	configure certain memory features. See Table 2-3.
CPU Information	Displays information related to microprocessors (speed,
	cache size, and so on). See Table 2-4.
SATA Configuration	Enables or disables a Serial Advanced Technology
	Attachment (SATA) device (such as hard drive, CD drive,
	or DVD drive). See "SATA Configuration Screen" on
	page 51.
Boot Sequence	Determines the order in which the system searches for
	boot devices during system startup. Available options can
	include the diskette drive, CD drive, hard drives, and
	network. If you have installed a RAC, additional options
	such as virtual floppy and virtual CD-ROM may be
	present.
	NOTE: System boot is not supported from an external device
	attached to a SAS or SCSI adapter. See support.dell.com for
	the latest support information about booting from external
	devices
Hard-Disk Drive	Determines the order in which the system searches the
Sequence	hard drives during system startup. The selections depend
	on the hard drives installed in your system.
USB Flash Drive	Determines the emulation type for a USB flash drive. Hard
Emulation Type	disk allows the USB flash drive to act as a hard drive.
(Auto default)	Floppy allows the USB flash drive to act as a removal
	diskette drive. Auto automatically chooses an emulation
	type.
Boot Sequence Retry	Enables or disables the Boot Sequence Retry feature.
(Disabled default)	When set to Enabled, the system re-attempts the boot
	sequence after a 30-second timeout if the previous boot
	attempt failed.
Integrated Devices	Displays a screen to configure the system’s integrated
	devices.
PCI IRQ Assignment	Displays a screen to change the IRQ assigned to each of
	the integrated devices on the PCI bus, and any installed
	expansion cards that require an IRQ.

48

Using the System Setup Program