Dell R300 owner manual Alert! Unsupported

Table 1-7. System Messages (continued)

Message	Causes	Corrective Actions
Alert! Unsupported	Unsupported DIMMs,	For memory configuration
memory, incomplete	mismatched DIMMs, or	information, see "Memory
sets, or unmatched	unmatched DIMMs have	Module Installation
sets. The following	been detected. If more	Guidelines" on page 102. If
memory is disabled: than one DIMM is		the problem persists, see
	present, DIMMs must be	"Troubleshooting System
	installed in matching	Memory" on page 135.
	pairs.

Attempting to	Remote Configuration
update Remote	request has been detected
Configuration.	and is being processed.
Please wait...

Wait until the process is complete.

BIOS Update Attempt	Remote BIOS update	Retry the BIOS update. If
Failed!	attempt failed.	problem persists, see
		"Getting Help" on page 165.

Caution! NVRAM_CLR jumper is installed on system board.

Decreasing available memory

NVRAM_CLR jumper is installed. CMOS has been cleared.

Faulty or improperly installed memory modules.

Remove NVRAM_CLR jumper. See Figure 6-1 for jumper location.

See "Troubleshooting System Memory" on page 135.

Diskette drive 0	Faulty or improperly	See "Troubleshooting a
seek failure.	inserted diskette,	Diskette Drive" on page 138.
	incorrect configuration
	settings in the System
	Setup program, or loose
	diskette/tape drive
	interface cable, or loose
	power cable. Replace the
	diskette.
Diskette read	Faulty diskette, faulty or	See "Troubleshooting a
failure.	improperly connected	Diskette Drive" on page 138.
	diskette/tape drive
	interface cable, or loose
	power cable.

About Your System

35