Dell R300 owner manual 6. LCD Status Messages continued

Table 1-6. LCD Status Messages (continued)

Code	Text	Causes	Corrective Actions
E1811	HDD ## Rbld	The specified hard drive has	See "Troubleshooting a
	Abrt	experienced a rebuild abort.	Hard Drive" on page 142.
			If the problem persists,
			see your RAID
			documentation.
E1812	HDD ##	The specified hard drive has	Information only.
	Removed	been removed from the
		system.

E1913 CPU &	The BMC firmware does not
Firmware	support the CPU.
Mismatch

Update to the latest BMC firmware. See the BMC User’s Guide for more information on setup and use of BMC.

E1A12	PCI Rsr	One or all of the PCIe risers
	Config	is configured incorrectly,
		preventing the system from
		powering on.
E1A12	PCI Rsr	One or all of the PCIe risers
	Missing	is missing, preventing the
		system from powering on.
E1A14	SAS Cable A	SAS cable A is missing or
		bad.

E1A15 SAS Cable B SAS cable B is missing or bad.

Reinstall the missing riser card(s).

Check that all connections are secure and correctly positioned.

Reseat the cable. If the problem persists, replace cable.

If the problem persists, see "Getting Help" on page 165.

Reseat the cable. If the problem persists, replace cable.

If the problem persists, see "Getting Help" on page 165.

About Your System

29