Carrier 30RY/RYH, 30RA/RH manual Description of the Broadcast sub-menu

HOLIDAY PERIOD X CONFIGURATION SUB-MENUS (X = 1 TO 16)

ITEM #	FORMAT	COMMENTS
0	HoLidAy X Sub-menu	When selected this item authorises a return to
		the configuration menu.
1	0 to 12	Start month of public holiday period
		0 = period not in use
		1 = January, 2 = February, etc.
2	0 to 31	Start day of public holiday period. 0 period
		not in use.
3	0 to 99 days	Duration of the public holiday period in
		days.

Typical programming for public holidays:

A public holiday period lasting 1 day on 20th May, for instance, is configured as follows: start month = 5, start day = 20, duration = 1

A public holiday period lasting 2 day on 25th May, for instance, is configured as follows: start month = 5, start day = 25, duration = 2

BROADCAST CONFIGURATION SUB-MENU

4.3.11.8 - Description of the Broadcast sub-menu

The controller provides a broadcast configuration menu which you can use to configure the unit to be the CCN’s broadcaster, responsible for transmitting the time, outdoor temperature, and holiday flags to all system elements.

This menu also authorises setting the date of the daylight saving time. There should be only one broadcaster in a CCN, so this table should not be configured if any other system element is acting as broadcaster.

ATTENTION: If the unit operates in standalone mode (not CCN connected) this menu can also must be used if the holi-day function is used or to correct for daylight saving time.

ITEM #	FORMAT	COMMENTS
0	broAdCASt MEnu	When selected this item authorises a return to the main menu.
1	YES/no	Determines whether or not the unit is a broadcast acknowledger when the unit is connected on a CCN network. There must be only
		one broadcast acknowledger in a CCN.
		Warning: if the unit operates in standalone mode (not CCN connected) this choice must be set to Yes if the holiday function is used
		(see section 4.3.11.6) or if you want to configure the daylight saving time function.
2	YES/no	This item authorises enabling or disabling the Broadcast function. When it is set to Yes, the control will make a periodic broadcast
		on the CCN. When it is set to No, the control is not the broadcaster and there is no need to configure the other choice in this table.
		There must be only one broadcaster in a CCN and this item should not be configured if any other system element is acting as
		broadcaster.
		Warning: if the unit operates in standalone (not CCN connected) this choice must be set to Yes if the holiday function is used (see
		section 4.3.11.6) or if you want to configure the daylight saving time function.
3	nnn	OAT Broadcaster bus number: it is the bus number of the system that has the outside air temperature sensor connected to it.
	0 to 239	Used for CCN network function only.
4	nnn	OAT Broadcaster element number: it is the element number of the system element that has the outside air temperature sensor
	0 to 239	connected to it. Used for CCN network function only.
5	nn	Daylight saving start month. In this mode you enter the month in which the broadcaster will adjust its time for the start of
	1 to 12	daylight saving time.
6	nn	Daylight saving start day. In this mode you enter the day on which the broadcaster will adjust its time for the start of daylight
	1 to 31	saving time.

7n1n2n3n4 00:00 to 24:00

Authorises entering the hours and minutes for saving start. In this mode you enter the time of day when the broadcaster will adjust its time for the start of daylight saving time.

n1n2: hours (00 to 24). The first time the Enter button is continuously pressed, the first two characters in the 4-digit display flash so that hours can be adjusted.

n3n4: minutes (00 to 59). Continuous pressing of the Enter key again causes the last two characters to flash so that minutes can be adjusted.

8	nnnn	Daylight saving start minutes to add: number of minutes by which the broadcaster will adjust its time for the start of daylight
	1 to 1440 minutes	saving time.
9	nn	Daylight saving stop month. In this mode you enter the month in which the broadcaster will adjust its time for the end of
	1 to 12	daylight saving time.
10	nn	Daylight saving stop day. In this mode you enter the day on which the broadcaster will adjust its time for the end of daylight
	1 to 31	saving time.

11n1n2n3n4 00:00 to 24:00

Authorises entering the hours and minutes for saving stop. In this mode you enter the time of day when the broadcaster

will adjust its time for the end of daylight saving time.

n1n2: hours (00 to 24). The first time the Enter button is continuously pressed, the first two characters in the 4-digit display flash so that hours can be adjusted.

n3n4: minutes (00 to 59). Continuous pressing of the Enter key again causes the last two characters to flash so that minutes can be adjusted.

12	nnnn	Daylight saving start minutes to subtract: number of minutes by which the broadcaster will adjust its time for the end of
	1 to 1440 minutes	daylight saving time.

27