Carrier 30RY/RYH Setting Up Pro-Dialogcontrol, Local interface general features, Main interface

4 - SETTING UP PRO-DIALOG CONTROL

4.1 - Local interface general features

MAIN INTERFACE SUMMARY INTERFACE

MENU BLOCK PRO-DIALOG PLUS INTERFACE PRO-DIALOG JUNIOR INTERFACE

The local interface enables a number of operating parameters to be displayed and modified.

The interface consists of two distinct parts: the main interface (left-hand section) and the summary interface (right-hand section).

Main interface

It gives access to all PRO-DIALOG data and operating functions. It consists of:

•A two-digit display showing the number of the item selected.

•A four-digit display showing the contents of the item selected.

•LEDs and buttons for unit start/stop, menu selection, menu item selection and value adjustment.

PRO-DIALOG Junior interface: On some units the local user interface consists only of a simplified main interface (left-hand section) that is identical to the main interface described below, but does not include the menu block diodes.

MAIN INTERFACE

BUTTON	NAME	DESCRIPTION
	Menu	Permits the selection of a main menu. Each main menu is represented by an icon. The icon is lit if active.
	Up arrow	Permits scrolling through the menu items (in the two-digit display). If the modification mode is active this button authorises
		increase of the value of any parameter.
	Down arrow	Permits scrolling through the menu items (in the two-digit display). If the modification mode is active this button authorises
		decrease of the value of any parameter.
	Enter	Gives access to the modification mode, validates a modification or displays expanded item description.
	Start/stop	Authorises start or stop of the chiller in local mode or modification of its operating type.
MAIN INTERFACE MENU LED'S
LED*	NAME		DESCRIPTION	INTERFACE DISLAY
	INFORMATION menu		Displays the general operating parameters for the unit.	Information
	TEMPERATURES menu		Displays the unit operating temperatures.	Temperatures
kPa	PRESSURES menu		Displays the unit operating pressures.	Pressures
	SETPOINTS menu		Displays the unit setpoints and enables them to be modified.	Setpoints
	INPUTS menu		Displays the status of the unit digital and analogue inputs.	Inputs
	OUTPUTS/TESTS menu		Displays the status of the unit outputs and enables them to be tested.	Outputs
	CONFIGURATIONS menu		Displays the unit configuration and enables it to be modified.	Confguration
	ALARMS menu		Displays active alarms.	Alarms
	ALARMS HISTORY menu		Displays the history of the alarms.	History
	RUNTIMES menu		Displays the operating times and number of starts for the unit and the	Runtimes
			compressors.

* Not available on the PRO-DIALOG Junior interface.

9