Carrier 30RA/RH, 30RY/RYH manual Expand display

4.3.4 - Expand display

Pressing the Enter button causes a 23 character text expansion to be scrolled across the four-digit display. All user menus provide an expansion of the current displayed parameters. If the expansion is complete the four-digit display reverts to item value. This function can be inhibited through the User Configuration menu.

MODIFYING THE VALUE OF A PARAMETER

OPERATION	PRESS BUTTON	MENU LED	ITEM NUMBER	ITEM VALUE
			2-DIGIT DISPLAY	4-DIGIT DISPLAY

Hold on the MENU button until the LED for SETPOINT lights.

PRO-DIALOG Junior interface: Press the menu button, until SETPOINTS is displayed in the 4-digit display

Press one of the Arrow buttons until the two-digit display shows 1 (item number 1- cooling setpoint 2).

The value for setpoint 2 is displayed in the four-digit display (6.0°C in this example).

Press the Enter button for more than 2 seconds to enable the value associated with item 1 to be modified.

The Setpoint menu LED and the two-digit display flash indicating that modification mode is active.

0
0	SEtPoint
1
1	6.0
	6.0

1

Keep pressing the Down Arrow button until the value 5.7 is displayed in the four-	1	5.9
digit display. The Setpoint menu LED and the two-digit display keep flashing.
	1	5.8

1

5.7

Press the Enter button again to validate the change. The new setpoint is 5.7°C.15.7 The Setpoint menu LED and the two-digit display stop flashing, indicating that

modification mode no longer applies.

12