Carrier 30RA/RH, 30RY/RYH manual Description of the Holidays sub-menus, Typical timer program

Program is in unoccupied mode unless a schedule time period is in effect. If two periods overlap and are both active on the same day, the occupied mode takes priority over the unoccupied period.

Each of the eight periods can be displayed and changed with the aid of a sub-sub-menu. The table below shows how to access the period configuration. Method is the same for the time schedule #1 or the time schedule #2.

PERIOD X CONFIGURATION SUB-MENUS (X = 1 TO 8)

ITEM #	FORMAT	COMMENTS
0	Period X Menu	Indicates the period (X) you are going to configure.
		When selected this item authorises a return to the
		main menu.
1	n1n2n3n4	Occupied period - Start time*.
	00:00 to 24:00	Authorises entering the time of day at which the
		occupied period starts.
2	n1n2n3n4	Occupied period - End time*.
	00:00 to 24:00	Authorises entering the time of day at which the
		occupied period ends.
3	Mo- 0 or Mo- 1	1	= the period is in effect on Monday.
		0	= period not in effect on Monday
4	tu- 0 or tu- 1	1	= the period is in effect on Tuesday.
		0 = period not in effect on Tuesday.
5	UE-0 or UE- 1	1	= the period is in effect on Wednesday.0 =
		period not in effect on Wednesday.
6	tH- 0 or tH- 1	1	= the period is in effect on Thursday.
		0	= period not in effect on Thursday.
7	Fr-0 or Fr- 1	1	= the period is in effect on Friday.
		0	= period not in effect on Friday.
8	SA- 0 or SA- 1	1	= the period is in effect on Saturday.
		0	= period not in effect on Saturday.
9	Su- 0 or Su- 1	1	= the period is in effect on Sunday.
		0	= period not in effect on Sunday.
10	Ho- 0 or Ho- 1	1	= the period is in effect on public holidays.
		0	= period not in effect on public holidays.

*n1n2: hours (00 to 24). The first time the Enter button is continuously pressed, the first two characters in the 4-digit display flash so that hours can be adjusted.

n3n4: minutes (00 to 59). Continuous pressing of the Enter key again causes the last two characters to flash so that minutes can be adjusted.

4.3.11.7 - Description of the Holidays sub-menus

This function is used to define 16 public holiday periods. Each period is defined with the aid of three parameters: the month, starting day and duration of the public holiday period. During these public holidays the controller will be in occupied or unoccupied mode, depending on the programmed periods validated for public holidays (see section 4.3.11.6).

Each of these public holiday periods can be displayed and changed with the aid of a sub-menu.

ATTENTION: The broadcast function must be activated to utilise the holiday schedule, even if the unit is running in stand-alone mode (not connected to CCN). See section 4.3.11.8.

Typical timer program:

Time	MON	TUE	WES	THU	FRI	SAT	SUN	HOL
0	P1
1	P1
2	P1
3
4
5
6
7	P2	P2	P3	P4	P4	P5
8	P2	P2	P3	P4	P4	P5
9	P2	P2	P3	P4	P4	P5
10	P2	P2	P3	P4	P4	P5
11	P2	P2	P3	P4	P4	P5
12	P2	P2	P3	P4	P4
13	P2	P2	P3	P4	P4				MON :
14	P2	P2	P3	P4	P4
									TUE :
15	P2	P2	P3	P4	P4
									WED :
16	P2	P2	P3	P4	P4
									THU :
17	P2	P2	P3
									FRI :
18			P3						SAT :
19			P3						SUN :
20									HOL :
			P3					P6
21
22
23
24

Monday

Tuesday Wednesday Thursday Friday Saturday Sunday Public holidays

Occupied Unoccupied

	Starts at	Ends at	Active on
P1: period 1,	0h00,	3h00,	Monday
P2: period 2,	7h00,	18h00,	Monday and Tuesday
P3: period 3,	7h00,	21h00,	Wednesday
P4: period 4,	7h00,	17h00,	Thursday and Friday
P5: period 5,	7h00,	12h00,	Saturday
P6: period 6,	20h00,	21h00,	Public holidays
P7: period 7,	Not used in this example
P8: period 8,	Not used in this example

26