SLEEP TIMER
The SLEEP timer can be used to automatically set this unit in the standby mode. This timer is useful when you are going to sleep while enjoying a broadcast or other desired input source. The SLEEP timer can only be set with the remote control.
Notes
•First press AMP(TUNER), TAPE/MD, CD or DVD/LD on the component selector to set the SLEEP timer for this unit.
•The SLEEP timer is effective for the components connected to the AC OUTLET(S) on the rear panel of this unit.
Canceling the Selected SLEEP
Timer
Press SLEEP repeatedly until “SLEEP OFF” appears on the display.
It will soon disappear and the “SLEEP” indicator will go off.
Setting the SLEEP Timer
1Play a source you want to enjoy when you are going to sleep.
2Press SLEEP repeatedly to
select the desired SLEEP time.
Each time you press SLEEP, the SLEEP time will change as below:
120 
90 
60 
30
The SLEEP timer is off
(SLEEP OFF).
(This is the state before
SLEEP is pressed.)
Flashes
3The “SLEEP” indicator soon lights up on the display after the SLEEP timer has been set.
The display returns to the previous indication.
Note
•The SLEEP timer can also be canceled by setting the unit in the standby mode by using POWER on the remote control (or STANDBY/ON), or by disconnecting the AC power cord from the AC power outlet.
Lights up
42
