EON Function | Yamaha RX-V496RDS instruction

RECEIVING RDS STATIONS

EON Function

This function uses the EON data service on the RDS station network. If you simply select the desired program type (NEWS, INFO, AFFAIRS or SPORT), the unit automatically searches for all preset RDS stations that are scheduled to broadcast a program of the required type and switches from the station being currently received to the new station when the broadcasts starts.

Note

•This function can only be used when an RDS station that offers the EON data service is being received. When such a station is being received, the “EON” indicator lights up on the display.

–	+	–	+
			2

1Make sure that the “EON” indicator lights up on the display.

If the “EON” indicator does not light up, tune in to another RDS station so that the “EON” indicator lights up.

Lights up

2Press EON repeatedly to select the desired program type (NEWS, INFO, AFFAIRS or SPORT).

The selected program type name indicator lights up on the display.

Lights up

•If a preset RDS station of the selected program type starts broadcasting, the unit will automatically switch from the program being currently received to that program. The program type name indicator flashes.

Flashes

•When broadcasting of the required program ends, the previously received station (or another program on the same station) is recalled.

■To cancel this function

Press EON repeatedly until no program type name lights up on the display.

34

Image 36

Yamaha RX-V496RDS owner manual EON Function, Make sure that the EON indicator lights up on the display

Contents

RX-V496RDS For U.K. customers Special Instructions for U.K. Model Featurescontents Checking the Package Contents Battery ReplacementGetting Started Control Using the Remote Control Controls and Functions Front Panel PRESET/TUNING PRESET/TUNING, EditTuning Mode AUTO/MAN’L Mono PTY Seek Mode Display Remote Control Speaker Setup Speaker PlacementSpeakers to Be Used Before Connecting Components Connections Connecting the Antennas Indoor FM antenna includedOutdoor FM antenna Connecting the AM loop antenna AM loop antenna includedOutdoor AM antenna Ground GND terminal Connecting an Audio Component Phono terminals Connecting a Video Component Audio signal terminalsVideo signal terminals Digital audio signal terminals Video terminals Video AUX terminals on the front panel Connecting Speakers Main speaker terminalsRear speaker terminals Center speaker terminal Connecting to the Main Speakers terminals Connecting to the Rear and Center Speakers terminalsSpeaker cables Impedance Selector Switch Connecting the Power Supply CordsAC Outlets Switched Adjusting the Speaker Balance Before You Start Adjusting Using the Test ToneTurn up the volume Set BASS, Treble and Balance to the 0 position Press Test When the adjustment is complete, press Test Test OFF appears on the display and the test tone stops Playing a Source To select a tape or an MD sourcePress Speakers a or B To select the main When you have finished using this unit To mute the soundBGV background video function Switching the input mode AutoDTS Analog Encoded with DTS On the remote control Digital Sound Field Processor DSP EffectSelecting a DSP Program Off the effect speakers Sound Field Program Program Subprogram Features Movie TheaterDgtl Spectacle Dgtl Adventure For Hi-Fi audio sources Dolby Pro Logic + 2 digital sound fieldsDolby Digital or DTS + 3 digital sound fields Tuning Automatic TuningManual Tuning Press PRESET/TUNING Edit to turn z off Automatic preset tuning options When automatic preset tuning is completedStations only Hold down Memory for about three seconds Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations Example If you want to exchange preset station E1 with A5Recall preset station E1 Hold down PRESET/TUNING Edit for about three second Changing the RDS Mode Receiving RDS StationsDescription of RDS Data To cancel this function Program types in the PTY modePress PTY Seek Mode to set the unit in the PTY Seek mode PTY Seek Function Make sure that the EON indicator lights up on the display EON Function Recording a Source on TAPE, MD or Video Cassette Select the source you want to record Range DTS LFE Cntr Delay 10.MEM. Guard 11.SAT Input SET MenuCenter SP Rear SP Main SP Bass OUT Main LVL D. LFE Description of Each Item Center SP Range Adjusting the dynamic range MAXMIN Cntr Delay Adjusting the delay of the center sound AutoLast Delay Time and Speaker Output Levels Delay TimeSound Output Level of the Center Subwoofer Adjusting Method Sleep Timer Canceling the Selected Sleep TimerSetting the Sleep Timer Preset Remote Control Controlling the Components Connected to This UnitExample To control Yamaha CD player Description of Each Mode TAPE/MD ModeDisplay MD CD Mode Display DVD/LD Mode DVD Menu Mode VCR Mode CBL/SAT ModeTV Mode Setup codes Advanced InformationTo use a second and third VCR Returning to the factory-set codes Enter the code number Troubleshooting Symptom Cause RemedyGeneral Tuner Be heard Remote control When playing back a source encoded with DTSOthers Specifications Glossary Cinema DSP Cinema DSP Index Video components DVD/LD player, VCR and TV BSR SEG Cable Satellite TunerVCR DVD Player LD PlayerCD Player MD Recorder Tape Deck V502870-2 Quick Reference Card Amptuner TAPE/MD DVD/LD DVD Menu VCR CBL/SAT VCR Stop