PRESET REMOTE CONTROL
The provided remote control is factory set to control not only this unit but also most YAMAHA audio components connected to it.
There are eight component selector buttons. Press one of these buttons which corresponds to the component you want to control with the remote control. For example, if you press CD on the component selector, the remote control is set to the CD operation mode, allowing the CD player to be controlled by the buttons on the remote control.
AMP(TUNER)
You can perform the basic operations of this unit. Refer to page 7.
CD
The code for a YAMAHA CD player is factory set.
DVD/LD & DVD MENU
An LD player can be controlled in
the DVD/LD mode. A DVD player can be controlled in the DVD/LD and DVD MENU modes. The code for a YAMAHA DVD player is factory set. If the remote control does not operate your YAMAHA DVD player, you need to set the code number “0048”.
TAPE/MD
The code for a YAMAHA tape deck is factory set. (The code for the YAMAHA MD recorder can also be set.)
VCR
A VCR can be controlled.
TV
A TV can be controlled.
CBL/SAT
A cable TV or satellite tuner can be controlled.
Note
• The button functions on the remote control differ depending on the operation mode. Refer to the following pages for details.
Controlling the Components Connected to This Unit
■Example: To control YAMAHA CD player
5
7 2 
3
4
6
5Press CD on the component selector.
6Press p.
Refer to page 45 for the CD player operation buttons.
7Adjust the volume.
ADVANCED OPERATION
1Make sure that VOLUME is set to the “ m” position.
2 Press AMP(TUNER) on the component selector.
3Turn on the power.
4 Press CD on the input selector.
If you set the remote control with the manufacturers’
codes listed from page i at the end of this
manual, you can control other brands of components. Refer to “Setup codes” on page 48 for details.
English
43
