Auto, Dts, Analog, Switching the input mode | Yamaha RX-V496RDS

PLAYING A SOURCE

Input Mode (for the DVD/LD and TV/ digital TV and satellite tuner sources)

This unit allows you to switch the input mode for sources that send both digital and analog signals to this unit. The AUTO, DTS and ANALOG input modes are provided.

When you turn on the power of this unit, the input mode for the DVD/LD source is always set to AUTO and for TV/ digital TV or satellite tuner source is set according to “SAT INPUT” in the SET MENU. (Refer to page 39 for details.)

■AUTO

In this mode, the input signal is selected in the following order of priority:

1.Digital signal encoded with Dolby Digital or DTS

2.Normal digital signal (PCM)

3.Analog signal (ANALOG)

Note

•If digital signals are input from both the OPTICAL and COAXIAL terminals, the digital signal from the COAXIAL terminal is selected.

■DTS

In this mode, only a digital signal encoded with DTS is selected, even if other signals are being input at the same time.

■ANALOG

In this mode, only an analog signal is selected, even if a digital signal is being input at the same time. Select this mode when you want to use an analog signal instead of a digital signal.

■Switching the input mode

Press INPUT MODE (or the input selector button that you have pressed to select the input source on the remote control) repeatedly until the desired input mode is shown on the display.

	or
Front panel	Remote control

Notes

•Set the input mode to AUTO to play a DVD/LD source encoded with Dolby Digital.

•Set the input mode to ANALOG to play a normal 2-channel source with a Dolby Surround program.

•The sound output may be interrupted for some LD and DVD players in the following situation: The input mode is set to AUTO. A search is performed while playing the disc encoded with Dolby Digital or DTS, and then disc playing is restored. The sound output is interrupted for a moment because the digital signal was selected again.

•The input mode cannot be changed for the CD, TUNER, TAPE/ MD, VCR, PHONO and VIDEO AUX sources because only analog signals are used for these.

•The current input mode appears on the display when the DVD/ LD, TV/digital TV or satellite tuner source is selected or the input mode is changed.

22

Image 24

Yamaha RX-V496RDS owner manual Auto, Dts, Analog, Switching the input mode

Contents

RX-V496RDS For U.K. customers Special Instructions for U.K. Model Featurescontents Checking the Package Contents Battery ReplacementGetting Started Control Using the Remote Control Controls and Functions Front Panel PRESET/TUNING PRESET/TUNING, EditTuning Mode AUTO/MAN’L Mono PTY Seek Mode Display Remote Control Speaker Setup Speaker PlacementSpeakers to Be Used Before Connecting Components Connections Connecting the Antennas Indoor FM antenna includedOutdoor FM antenna Connecting the AM loop antenna AM loop antenna includedOutdoor AM antenna Ground GND terminal Connecting an Audio Component Phono terminals Connecting a Video Component Audio signal terminalsVideo signal terminals Digital audio signal terminals Video terminals Video AUX terminals on the front panel Connecting Speakers Main speaker terminalsRear speaker terminals Center speaker terminal Connecting to the Main Speakers terminals Connecting to the Rear and Center Speakers terminalsSpeaker cables Impedance Selector Switch Connecting the Power Supply CordsAC Outlets Switched Adjusting the Speaker Balance Before You Start Adjusting Using the Test ToneTurn up the volume Set BASS, Treble and Balance to the 0 position Press Test When the adjustment is complete, press Test Test OFF appears on the display and the test tone stops Playing a Source To select a tape or an MD sourcePress Speakers a or B To select the main When you have finished using this unit To mute the soundBGV background video function Switching the input mode AutoDTS Analog Encoded with DTS On the remote control Digital Sound Field Processor DSP EffectSelecting a DSP Program Off the effect speakers Sound Field Program Program Subprogram Features Movie TheaterDgtl Spectacle Dgtl Adventure For Hi-Fi audio sources Dolby Pro Logic + 2 digital sound fieldsDolby Digital or DTS + 3 digital sound fields Tuning Automatic TuningManual Tuning Press PRESET/TUNING Edit to turn z off Automatic preset tuning options When automatic preset tuning is completedStations only Hold down Memory for about three seconds Manual Preset Tuning To Recall a Preset Station Exchanging Preset Stations Example If you want to exchange preset station E1 with A5Recall preset station E1 Hold down PRESET/TUNING Edit for about three second Changing the RDS Mode Receiving RDS StationsDescription of RDS Data To cancel this function Program types in the PTY modePress PTY Seek Mode to set the unit in the PTY Seek mode PTY Seek Function Make sure that the EON indicator lights up on the display EON Function Recording a Source on TAPE, MD or Video Cassette Select the source you want to record Range DTS LFE Cntr Delay 10.MEM. Guard 11.SAT Input SET MenuCenter SP Rear SP Main SP Bass OUT Main LVL D. LFE Description of Each Item Center SP Range Adjusting the dynamic range MAXMIN Cntr Delay Adjusting the delay of the center sound AutoLast Delay Time and Speaker Output Levels Delay TimeSound Output Level of the Center Subwoofer Adjusting Method Sleep Timer Canceling the Selected Sleep TimerSetting the Sleep Timer Preset Remote Control Controlling the Components Connected to This UnitExample To control Yamaha CD player Description of Each Mode TAPE/MD ModeDisplay MD CD Mode Display DVD/LD Mode DVD Menu Mode VCR Mode CBL/SAT ModeTV Mode Setup codes Advanced InformationTo use a second and third VCR Returning to the factory-set codes Enter the code number Troubleshooting Symptom Cause RemedyGeneral Tuner Be heard Remote control When playing back a source encoded with DTSOthers Specifications Glossary Cinema DSP Cinema DSP Index Video components DVD/LD player, VCR and TV BSR SEG Cable Satellite TunerVCR DVD Player LD PlayerCD Player MD Recorder Tape Deck V502870-2 Quick Reference Card Amptuner TAPE/MD DVD/LD DVD Menu VCR CBL/SAT VCR Stop