AM loop antenna included, Outdoor AM antenna | Yamaha RX-V496RDS

■AM loop antenna (included)

AM loop antenna

■Connecting the AM loop antenna

1

3

2

45

Antenna stand

■Outdoor AM antenna

Vinyl covered wire (5 m to 10 m)

■Ground (GND terminal)

CONNECTIONS

The AM loop antenna can be removed from the stand and attached to a wall, etc. However, note that the reception sensitivity may deteriorate if the antenna is attached to a metal or steel reinforced wall.

Notes

•The AM loop antenna should be placed away from this unit.

•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit.

1Press the tab and unlock the terminal hole.

2 Insert the AM loop antenna lead wires into the		PREPARATION
	AM ANT and GND terminals.	PREPARATION
	AM ANT and GND terminals.

	3 Return the tab to its original position to lock
	the lead wires. Lightly pull the lead wires to
	confirm a good connection.

	4 Attach the loop antenna to the antenna stand.

5Orient the AM loop antenna so that the best reception is obtained.

If you cannot obtain good reception with the AM loop antenna, connect 5 m to 10 m of vinyl covered wire to the AM ANT terminal and extend it outdoors from a window.

For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.

English

11

Image 13

Yamaha RX-V496RDS AM loop antenna included, Connecting the AM loop antenna, Outdoor AM antenna, Ground GND terminal

Contents

RX-V496RDS Special Instructions for U.K. Model For U.K. customers Featurescontents Battery Replacement Checking the Package ContentsGetting Started Control Using the Remote Control Front Panel Controls and Functions PRESET/TUNING, Edit PRESET/TUNINGTuning Mode AUTO/MAN’L Mono PTY Seek Mode Display Remote Control Speaker Placement Speaker SetupSpeakers to Be Used Connections Before Connecting Components Indoor FM antenna included Connecting the AntennasOutdoor FM antenna AM loop antenna included Connecting the AM loop antennaOutdoor AM antenna Ground GND terminal Phono terminals Connecting an Audio Component Audio signal terminals Connecting a Video ComponentVideo signal terminals Digital audio signal terminals Video AUX terminals on the front panel Video terminals Main speaker terminals Connecting SpeakersRear speaker terminals Center speaker terminal Connecting to the Rear and Center Speakers terminals Connecting to the Main Speakers terminalsSpeaker cables Connecting the Power Supply Cords Impedance Selector SwitchAC Outlets Switched Before You Start Adjusting Using the Test Tone Adjusting the Speaker BalanceTurn up the volume Set BASS, Treble and Balance to the 0 position Press Test Test OFF appears on the display and the test tone stops When the adjustment is complete, press Test To select a tape or an MD source Playing a SourcePress Speakers a or B To select the main To mute the sound When you have finished using this unitBGV background video function Auto Switching the input modeDTS Analog Encoded with DTS Digital Sound Field Processor DSP Effect On the remote controlSelecting a DSP Program Off the effect speakers Sound Field Program Theater Program Subprogram Features MovieDgtl Spectacle Dgtl Adventure Dolby Pro Logic + 2 digital sound fields For Hi-Fi audio sourcesDolby Digital or DTS + 3 digital sound fields Automatic Tuning TuningManual Tuning Press PRESET/TUNING Edit to turn z off When automatic preset tuning is completed Automatic preset tuning optionsStations only Hold down Memory for about three seconds To Recall a Preset Station Manual Preset Tuning Example If you want to exchange preset station E1 with A5 Exchanging Preset StationsRecall preset station E1 Hold down PRESET/TUNING Edit for about three second Receiving RDS Stations Changing the RDS ModeDescription of RDS Data Program types in the PTY mode To cancel this functionPress PTY Seek Mode to set the unit in the PTY Seek mode PTY Seek Function EON Function Make sure that the EON indicator lights up on the display Select the source you want to record Recording a Source on TAPE, MD or Video Cassette SET Menu Range DTS LFE Cntr Delay 10.MEM. Guard 11.SAT InputCenter SP Rear SP Main SP Bass OUT Main LVL D. LFE Center SP Description of Each Item MAX Range Adjusting the dynamic rangeMIN Auto Cntr Delay Adjusting the delay of the center soundLast Delay Time Delay Time and Speaker Output LevelsSound Output Level of the Center Subwoofer Adjusting Method Canceling the Selected Sleep Timer Sleep TimerSetting the Sleep Timer Controlling the Components Connected to This Unit Preset Remote ControlExample To control Yamaha CD player TAPE/MD Mode Description of Each ModeDisplay MD Display CD Mode DVD Menu Mode DVD/LD Mode CBL/SAT Mode VCR ModeTV Mode Advanced Information Setup codesTo use a second and third VCR Enter the code number Returning to the factory-set codes Symptom Cause Remedy TroubleshootingGeneral Be heard Tuner When playing back a source encoded with DTS Remote controlOthers Specifications Cinema DSP Cinema DSP Glossary Video components DVD/LD player, VCR and TV Index BSR SEG Satellite Tuner CableVCR LD Player DVD PlayerCD Player Tape Deck MD Recorder V502870-2 Amptuner TAPE/MD DVD/LD Quick Reference Card VCR Stop DVD Menu VCR CBL/SAT