Samsung Silver Nano Washing Machine Manual for Optimal Laundry Performance

HOW TO WASH AUTOMATICALLY DEPENDS ON THE LAUNDRY

Before starting washing, check the following;

•Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose.

■ WASHING FOR THE FIRST TIME

Before washing clothes for the first time, you must run a complete cycle without clothes. To do this:

1. Press the POWER button.

2. Pour a little detergent into compartment in the detergent drawer.

3.Turn on the water supply to the washing machine.

4.Press the Start/Hold button.

This will remove any water from the manufacturer’s test run remaining in the machine.

SPECIAL NOTES!

Automatic Sensing Function

•At every course (except, wool course) the amount of laundry is automatically sensed and then appropriate water level, washing time, rinsing cycle, and spinning time are automatically selected for automatic washing.

•After the power is on, a course is selected and Start/Hold button is pressed. Then, the washing board starts spinning without water. This action senses how much laundry is in the washing basket, not a machine problem. After this sensing process, water supplies automatically.

Adding Detergent and Softener

•It senses the amount of laundry and indicates the water level and amount of detergent. Then, it starts water supply right away.

•During the water supply, it is possible to open the detergent box and add detergent. However, it is better to press Start/Hold button to stop water supply and add detergent. Close the lid and press Start/Hold button again. This way is much more convenient.

•If the softener is inserted in the softener dispenser, it automatically adds in at the last rinsing cycle.

Put the laundry into the washer and add detergent, too.

•Be careful not to overload. Use right detergent for the fabrics you are washing.

	• If the lid is open while running, the washing machine is stopped
Note!	automatically for safety. (Except, water supply continues while the lid
	is open.)

•When hot water is selected, both cold and hot water are supplied for the first 20 seconds in order to protect the clothes.

•Possible to control the washing time, rinsing cycle, and spinning time at every course during the washing.

■ DIGITAL(FUZZY) COURSE

Selects the best washing course automatically.

1. Press the POWER Button to“ON”.

2.Press the START/HOLD button.

Water level is selected automatically. Washing rinsing, and spinning follow. If you want to pause, press the START/HOLD button again. You can change the course when paused.

3.Close the lid.

■ BLANKET/HEAVY COURSE

(Big volume laundry like blanket and bed cover sheets)

1. Press the power button to“ON”.

2.Press the course select button once.

3.Press the START/HOLD button.

Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to pause, press the START/HOLD button again. You can change the course when paused.

4.Close the lid.

• Fold those big volume laundry (blanket

and bed cover sheets) in the following way before adding into the spin basket.

•Do not wash the electric blanket and carpets.

•Get a laundry net for those light and big volume laundry (eg. Cashmeres) because they might rise in the water and get damaged.

■SOAK COURSE

1.Press the POWER button.

2.Press the course select button twice.

3.Press the START/HOLD button once.

Water level is selected automatically. Washing, rinsing, and spinning follow.

4.Close the lid.

■SUPER CLEAN COURSE Operates only in cold water

1.Press the power button to“ON”.

2.Press the course select button three times.

3.Press the START/HOLD button and put the proper amount of detergent into tub.

Water level is selected automatically.

Water level is only selected MAXIMUM ~ MED-LOW.

4.Close the lid.

The washing finishes by the time you reserved.

- 7 -