—If your outfeed table is correctly set, no adjustments are necessary.

—If the insert lifts the straightedge off the table or the table is below the straightedge, loosen the outfeed table lock and outfeed table positive stop bolts and jam nuts (Figure 1, Page 5) and adjust the outfeed table height with the handwheel until the straightedge just touches a insert at its highest point of rotation.

Tip: Some advanced woodworkers have found that they can virtually eliminate snipe by set- ting the outfeed table in the following manner: Repeat Steps 1-4using a freshly exposed insert. Then lower the outfeed table slightly so the insert lifts the straightedge off the table. Place a ruler next to the straightedge and rotate the cutterhead, watching how far the carbide insert pulls the straightedge. Adjust the outfeed table and recheck until the straightedge only moves 5⁄32".

5.Lock the outfeed table, lock the outfeed table positive stop bolts, and reinstall the cutterhead guard (Page 39) and V-belt guards.

Digital Readout

Batteries

You must install two AAA batteries into the control panel for the digital readout to function.

To install the AAA batteries in the control panel:

1.Unscrew the thumb knob on the rear door on the back of the control panel, loosen the Phillips head screw, then swing the door open.

-16-

Bracket

Battery Holder

Thumb Knob

Phillips Head Screw

Access Door

Figure 14. Rear access door on control panel

(cutaway view for clarity).

2.Open the battery holder cover, install the included batteries, then close the cover.

Note: It may help to loosen the screws on the front of the panel securing the digital readout bracket to open the battery cover.

3.Close the rear access door, tighten the Phillips head screw, then install the thumb knob.

Test Run

Once the assembly is complete, test run your machine to make sure it runs properly and is ready for regular operation. The test run consists of verifying the following: 1) The motor powers up and runs correctly and 2) the stop button safety feature works correctly.

If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine immediately, then review Troubleshooting on Page 32.

If you cannot find a remedy, contact our Tech Support at (570) 546-9663 for assistance.

G0495X 8" Jointer w/Digital Readout

Page 17 Page 19
Page 18
Image 18
Grizzly G0495X owner manual Digital Readout Batteries, Test Run, To install the AAA batteries in the control panel
Page 17 Page 19

G0495X specifications

The Grizzly G0495X is a versatile and powerful tool designed for woodworking enthusiasts and professionals alike. This hybrid table saw combines cutting-edge technology with traditional craftsmanship, ensuring precision and efficiency in every project.

At the heart of the G0495X is its robust 3 HP motor, which delivers exceptional power to handle even the toughest hardwoods with ease. This heavy-duty drive system ensures smooth and reliable performance, reducing the risk of motor burnout during extended use. The saw's belt drive system further enhances its capability, providing a high degree of torque for challenging cutting tasks.

One of the standout features of the G0495X is its large cast iron table. Measuring a generous 30” x 42”, it provides ample workspace for handling larger materials while ensuring stability and accuracy in cuts. The precision-ground surface of the table reduces friction, allowing for smoother movement of wood across the surface. Additionally, the table features an integrated T-style miter gauge slot, offering the user versatility for various cutting angles.

In terms of safety, the G0495X is equipped with several important features. The riving knife and blade guard help to prevent kickbacks, making it safer to use, particularly for novices. The easy-to-use height and bevel adjustment mechanisms allow users to make quick changes to the blade settings for different cut types.

The saw also incorporates advanced dust collection capabilities. With a 4” dust port, it connects to most standard dust collection systems, significantly reducing the mess and maintaining a clean workspace. This feature not only keeps the area tidy but also enhances the user’s visibility while working.

Another notable characteristic of the Grizzly G0495X is its versatility. This table saw can handle various cutting tasks, from rip cuts to crosscuts, making it suitable for a range of woodworking projects, including furniture making, cabinetry, and more. The built-in extension table and side wings also expand the cutting capacity for larger projects.

Overall, the Grizzly G0495X stands out as a reliable and powerful table saw equipped with premium features that cater to both amateur and professional woodworkers. Its combination of performance, safety, and advanced technologies makes it an excellent investment for anyone serious about woodworking.
Top Page Image Contents