NETGEAR WGR614 v4 manual Wireless Card Access List Setup

Reference Manual for the 54 Mbps Wireless Router WGR614 v4

3.From the Wireless Settings menu, click the Setup Access List button to display the Wireless Access menu shown below.

Figure 3-5: Wireless Card Access List Setup

4.Click Add to add a wireless device to the wireless access control list. The Available Wireless Cards list displays.

5.Click the Turn Access Control On check box.

6.Then, either select from the list of available wireless cards the WGR614 v4 has found in your area, or enter the MAC address and device name for a device you plan to use. You can usually find the MAC address printed on the wireless adapter.

Note: You can copy and paste the MAC addresses from the firewall’s Attached Devices menu into the MAC Address box of this menu. To do this, configure each wireless PC to obtain a wireless link to the firewall. The PC should then appear in the Attached Devices menu.

7.Click Add to add this wireless device to the Wireless Card Access List. The screen changes back to the list screen. Repeat these steps for each additional device you wish to add to the list.

8.Be sure to click Apply to save your wireless access control list settings.

Now, only devices on this list will be allowed to wirelessly connect to the WGR614 v4.

3-10 Wireless Configuration

December 2003